Page 1 of 1
Body Liftin'
Posted: Sat Oct 27, 2007 7:56 pm
by spzook
Does anyone what size diameter tha body bolts are and what pitch/thread they have. I'm having trouble so i need to make some female bolts to put on.
Cheers.
Posted: Sat Oct 27, 2007 8:38 pm
by Gwagensteve
10.0mmX1.25, but for the effort, just buy one of Just Crusin's kits.
Steve.
Posted: Sat Oct 27, 2007 9:10 pm
by spzook
Thanks Steve. Old mans got taps and dyes and i've got no money so guess i'll just try making some. If it goes bad then will have to start saving.
Posted: Sat Oct 27, 2007 9:42 pm
by Gwagensteve
If you've got access to a lathe they're not that hard to make, but without a lathe it'll be hard to keep them aligned when drilling them.
The correct OD for the female bolts is 16mm.
Steve.
Posted: Sun Oct 28, 2007 6:48 am
by just cruizin'
if you are going to make them yourself make sure you use high tensile material, alot harder to do but essential.
Posted: Sun Oct 28, 2007 9:59 am
by FLUFFY
with hi tensile....sharpen your drill bit use plenty of coolant and take it easy.....
I've just made a set with socket head cap screws.
