Throttle position sensor 2lte

Post by **kanookie** » Sun Oct 28, 2007 12:25 pm

Do i need to use it? can i just hook up the fuel cut solenoid and tacho? or will i need to get an ecu for the engine?

Post by **tweak'e** » Sun Oct 28, 2007 2:36 pm

yes you need it. as well as ecu and the other sensors.

your not going to go far without the throttle cable connected to something

(unless you convert it to 2lt by useing a 2lt pump)

Post by **kanookie** » Sun Oct 28, 2007 6:32 pm

what other sensors will i need for it to run properly?

Post by **Dzltec** » Mon Oct 29, 2007 7:58 am

It depends if your are running the electronic pump or not, if it is the elctronic you will need everything. Crank, coolant, air temp, boost pressure, many relays etc.

Andy

Post by **kanookie** » Mon Oct 29, 2007 8:24 am

yeah its electric pump...will i need to use all the sensors? or can i just hook up the pump and the normal stuff?

Post by **tweak'e** » Mon Oct 29, 2007 1:05 pm

you need all the sensors that came with the motor originally.

map, water temp, air temp, crank postion and throttle position.

Outer Limits 4x4 Board

Throttle position sensor 2lte

Throttle position sensor 2lte

Who is online