Page 1 of 1

Zf + borg warner wiring

Posted: Mon Oct 29, 2007 5:34 pm
by shakes
In the process of a complete re-wire. A previous owner TOTALLY butchered what's in there so starting completely from scratch :bad-words:

I'm guessing the two wires coming off the back of the transfer are handbrake warning light?

The couple that come off the auto are wired were into the starting system so I'm assuming that they are the start lock to stop you starting it in gear(I really should go buy a manual) but can anyone give me a head's up on what's what so I can keep plugging along with it. ;)

Cheer's

Simon

Posted: Mon Oct 29, 2007 6:43 pm
by bigbad
I guess its a rangie, 89?

Posted: Mon Oct 29, 2007 6:55 pm
by bigbad
black and black/ pink are handbrake warning switch,

black/orange starter inhibitor

green/brown reverse lights

green feed for reverse lights

Posted: Mon Oct 29, 2007 7:45 pm
by DL
Hi Shakes,

We all supposedly went to the paperless office over a decade ago. Most manuals are here, all for nix:

www.landrover.ee/est/varia/downloads/cars.htm

You will find what what you want and more. They're all PDF's and most are 1 meg plus.

cheers, DL

Posted: Mon Oct 29, 2007 8:19 pm
by shakes
awesome thanks!

its an 83 and i didnt realise when I brought it that it had the late model tranny :? .

Simon

Posted: Mon Oct 29, 2007 8:47 pm
by DL
Yeah,

And this was the only place where I could get a pic of a Lockheed master cylinder that showed that what I'm missing from the PDWA part is a little plastic sleeve. Still need one.

cheers, DL