Page 1 of 1
% difference 3.7 to 3.9?
Posted: Mon Oct 29, 2007 8:09 pm
by want33s
Anyone good with a calculator? I have changed from 31's to 33's and from WT 3.7 diffs to NT 3.9 diffs.. Can anyone tell me how much difference there is in revs.... please?
(6.5:1 transfer gears.. 20% reduction in high.. 89 model wt)
Posted: Mon Oct 29, 2007 8:24 pm
by muppet_man67
without a calculator id say your about 6% taller
Posted: Mon Oct 29, 2007 8:31 pm
by mr green
Posted: Mon Oct 29, 2007 8:37 pm
by want33s
thanks mate.. according to that 31 to 33 goes from 3.7 to 3.9389.. close enough for me!
Posted: Tue Oct 30, 2007 5:58 am
by 11_evl
so we will be looking at a new login name for you soon.... want35s
Posted: Tue Oct 30, 2007 9:37 am
by want33s
I guess so..
I've done a few mods to make sure the 33's fit easily and I reckon I might nearly get 35's on without scrubbing. (without body lift)
Posted: Tue Oct 30, 2007 10:06 am
by nicbeer
Care to share what mods.
how much cutting have u done?
Nic
Posted: Tue Oct 30, 2007 10:38 am
by want33s
nicbeer wrote:Care to share what mods.
how much cutting have u done?
Nic
All will be revealed when I get it finished.
Basically all thats invloved is NT spring spacing on the front, moving diff forward, folding seams, extended brake lines, extended bumpstops 50mm and different flares.
Posted: Tue Oct 30, 2007 10:48 am
by tanshi
My 32" ET's (which measure 32 and 3 quarters) fitt well withh all of this except different flares, though i gots no gears... "yet"
Posted: Tue Oct 30, 2007 2:55 pm
by ofr57
want33s wrote:nicbeer wrote:Care to share what mods.
how much cutting have u done?
Nic
All will be revealed when I get it finished.
Basically all thats invloved is NT spring spacing on the front, moving diff forward, folding seams, extended brake lines, extended bumpstops 50mm and different flares.
thats sorta what i want to do to mine SPUA, RUF, 30mm forward , highsteer , longer lines , hoops ,WT diffs ... an abit of cutting if need be
