Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Decisions.

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Diff Decisions.

Post by KiwiBacon »

My rangie now has enough torque that it's tail happy in second gear on dry tarmac and more silliness is still to come.
I figure the old 10splines are feeling a bit stressed right now so I'm planning something stronger and taking the opportunity to fit a locker or two.

The best solution is undoubtedly arb or maxidrive. Going to 24spline at the same time. But these will take some time.

Is the 24 spline diff stronger than the 10 spline? I've been told this is my current "fuse". Is it worth swapping to say disco 24 spline diffs/axles/hubs?

Will ashcroft, maxidrive and other driveflanges fit under vogue alloys and the factory steel wheels without any mods?
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

The vouge alloys wont fit with maxi flanges as far as I know, well they don't on my rangie. I think they would if I cut the center hole bigger. The standard disco steel 16" rims fit fine and the sunrasers fit good to.
gas grass or arse no one rides for free
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

subaman wrote:The vouge alloys wont fit with maxi flanges as far as I know, well they don't on my rangie. I think they would if I cut the center hole bigger. The standard disco steel 16" rims fit fine and the sunrasers fit good to.
They do, they just stick out the centre cap ;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Just picked up some 24 spline disco axles (complete). They've travelled at least 250,000km less than my current 10 spline.

Has to be an upgrade, right? ;)
Top
Posts: 8
Joined: Tue Mar 13, 2007 9:51 pm
Location: Melbourne

Post by allranges4wd »

You're definately better off going with Maxi Drive parts. Give me a call for more details. 03 9762 2600 or www.allranges4wdservices.com

Cheers, Jamie
'96 Disco 35" Simexs 4" lift 2" body lift
'00 Cherokee 31" AT2's 4" lift Warn front bar, Magnaflow exhaust
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

you already know what axles i reccomend.......
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 41 guests