Page 1 of 1
SAS
Posted: Fri Nov 02, 2007 11:08 pm
by dirty dirty 4x4
i have a 90 surf ifs what parts do i need to sas it . do i have to go toyota or could i go nissan and is it best to go for a 5 link or 3 link front end also what welding and engineering needs to be done. is it able to be registerd in QLD
Posted: Sat Nov 03, 2007 7:50 am
by joel HJ60
Go on eBay mate. Look for solid axle Hilux font ends.
Posted: Sat Nov 03, 2007 8:59 am
by chunderlicious
first get in contact with an engineer. he will set you up, you might possibly not be able to have a 5 link as engineers like using standard mounts. patrol diffs are too wide unless you use the whole gq chassis your prolly best off doing a bundera front conversion.
Posted: Wed Nov 07, 2007 2:29 pm
by locktup4x4
Go with a 3" SAS if you want to keep it streetable and a Toyota axle.
Jason
Posted: Wed Nov 07, 2007 3:48 pm
by dirty dirty 4x4
i want to do a coily sas
Posted: Wed Nov 07, 2007 5:46 pm
by chunderlicious
call an engineer and tell him wht you plan to do
youll need a cruiser 78/9 series diff and radius arms etc. or a bundy diff with arms etc. dont know the width of the cruiser diff but it is being done by hales1234 off the forum