Outer Limits 4x4 Board

Quick, simple question... are they interchaneable?

Thanks.

Butt Craic wrote:Quick, simple question... are they interchaneable?

Thanks.

yes.

dumbdunce wrote:

Butt Craic wrote:Quick, simple question... are they interchaneable?

Thanks.

yes.

can you simplify that answer please

Shadow wrote:

dumbdunce wrote:

Butt Craic wrote:Quick, simple question... are they interchaneable?

Thanks.

yes.

can you simplify that answer please

no.

Later model 40 with full floating rear axles should be the same. Earlier model 40's have park brake on the driveshaft so brake drums are different, and semi-floating rear axles, which may have a different spline count.

The 60 series has a wider rear, so the long side axle is longer, but short side should be the same, and diffs are the same, but check the ratio - both 40's & 60's came with 3.7 and 4.1 ratio diffs

muddy12 wrote:Later model 40 with full floating rear axles should be the same. Earlier model 40's have park brake on the driveshaft so brake drums are different, and semi-floating rear axles, which may have a different spline count.

The 60 series has a wider rear, so the long side axle is longer, but short side should be the same, and diffs are the same, but check the ratio - both 40's & 60's came with 3.7 and 4.1 ratio diffs

He only asked about the hubs. So like dumdunce said.
YES.

simple gratitude....thanks!

Butt Craic wrote:simple gratitude....thanks!

No worries.