Outer Limits 4x4 Board

Does any one have one?

I need part no off the tail lights built in to bar. I smashed both lens and thats where the numbers are.

Thanks for the help

So I am the only one with a ARB rear bar it seems. Come on guys ARB are no help they tried to tell me that they never made one.

Funny I got it from them only 2 years ago.

And no its not a kamar

is it posibly a TJM bar ?

Maybe if you post a picture to jog peoples memory maybe....

cheers
harb

arb have made a rear bar, weird how they say they didnt

maccasMQ wrote:arb have made a rear bar, weird how they say they didnt

Weird how they did...but mine doesn't have the lights

Thats not a bad looking bar.....

I wish mine didn't have the crappy lights either. Being a 1989 model I didnt have lights in the bumper and had to wire the ones in the bar in. That is the engineered weakspot of the bar. Both my ends have bent up about half an inch through the light area which has distorted. I broke a lens about a month ago and the only place I could source them from was ARB at $50. I decided to cover both the holes with rubber from Clark rubber which cost me $4 and looks fine. I just cut it to shape and glued over the top. One day I will try and get a bar like jamies without the lights but they are rarer than hen's teeth. ARB said they wont make one without the balnks cutout for the lights, too much trouble.

how good does the one in the pic look!!

awesome!

Um.....is this it ? ????

http://cgi.ebay.com.au/ARB-Patrol-Rear- ... dZViewItem

tj81 wrote:Um.....is this it ? ????

http://cgi.ebay.com.au/ARB-Patrol-Rear- ... dZViewItem

'12 months old' yeah sure, ARB haven't made them for years

I paid $300 for mine 2nd hand and $100 for a sand blast and powdercoat

I think that you bought that bar off me I sold one with no lights in it for 300 bucks. it had 2 little dents in it?

A rav4 hit me in the arse at 80km I was stopped thats what broke my lights. bar is still good but. The rav4 didnt come off to well.

How do I put a pic in I will show you the rav4. I think I will make some leds fit some how.

ARB dont list it anymore thats why they never made it. D!)khe@ds

Thanks for the help but

Hey Redmav do you have the part number off the light cover but I know they are made by britax. I was hoping to contact Dritax direct maybe.[/img]

michael a wrote:I think that you bought that bar off me I sold one with no lights in it for 300 bucks. it had 2 little dents in it?

Nope I bought mine from a guy in Dingley MEL who bought a Cheezy bar

ok cool:)

How do I post a pic but I cant cut and paste.

No, sorry 'Michael a' I dont have the part number, even though I still have one lens cover attached its under my glued on rubber and I dont want to rip it off to find it out as I spent ages glueing it on. Somebody on here must have one that they can just walk to their driveway and write down a number.

PM Bazzle or Cossie on here. They should be able to help.

maccasMQ wrote:arb have made a rear bar, weird how they say they didnt

someone recently said you can still get the bar from ARB...

I had an ARB Bar on my GQ..are you talking about the one that looks like this?



If so then the tail lighst are the normal OEM Nissan Tail lights from a GQ II or a GU. The ones in this pic are GU tail lights i got off ebay.

The bar looks the same. but they are not the same lights. I think maybe they changed the lights in the one you had.

Thanks lockee I will p.m them.

Cheers

blkmav wrote:

tj81 wrote:Um.....is this it ? ????

http://cgi.ebay.com.au/ARB-Patrol-Rear- ... dZViewItem

'12 months old' yeah sure, ARB haven't made them for years

I paid $300 for mine 2nd hand and $100 for a sand blast and powdercoat

Sold for $650.00. Good price for the seller

patrol42 wrote:I had an ARB Bar on my GQ..are you talking about the one that looks like this?



If so then the tail lights are the normal OEM Nissan Tail lights from a GQ II or a GU. The ones in this pic are GU tail lights i got off ebay.

thats my old bar sold to patrol 42 it had no light holes in it i did the conversion , was told they did sell a few with the light holes and yes ARB dont make em any more UNLESS you can get 25 i think orders paid up front and they will do a run of them NOT SURE if this still happens just what the guys at out of town told me some time ago cheers

GUJohnno wrote:

blkmav wrote:

tj81 wrote:Um.....is this it ? ????

http://cgi.ebay.com.au/ARB-Patrol-Rear- ... dZViewItem

'12 months old' yeah sure, ARB haven't made them for years

I paid $300 for mine 2nd hand and $100 for a sand blast and powdercoat

Sold for $650.00. Good price for the seller

got beaten by 1 cent... lmao but $650

Got my lights lens $12.80 each bargin

ARB wanted $54 bucks each so I saved some money

Where did you get them from I tried everywhere and gave up refusing to pay $50+ from ARB

Ingrams in Sydney.

just chuck the early style pillar lights in and weld the holes shut, it looks awesome