rear diff
Posted: Mon Nov 05, 2007 4:13 pm
can anyone tell me how i get the center outta my rear diff?? got the 10 nuts off and driveshaft..it moves but wont come out?? 
Page 1 of 1
Posted: Mon Nov 05, 2007 4:47 pm
Have you pulled the axles out
Posted: Mon Nov 05, 2007 4:53 pm
nope haha how do u do that
Posted: Mon Nov 05, 2007 5:00 pm
1) Wheels off
2) Undo rear brake lines on both sides
3) Take callipers off to remove disc
4) Remove handbrake cables (what a stupid pain in the arse design) - worst part of the job by a long shot
5) Undo 4 bolts connecting huib assembly to axle housing
6) Pull.
Another option for 4) might be to undo the bolts holding the hanbrake to the shassis & body and disconnect it at the handbrake und underneath. That may be easier.
2) Undo rear brake lines on both sides
3) Take callipers off to remove disc
4) Remove handbrake cables (what a stupid pain in the arse design) - worst part of the job by a long shot
5) Undo 4 bolts connecting huib assembly to axle housing
6) Pull.
Another option for 4) might be to undo the bolts holding the hanbrake to the shassis & body and disconnect it at the handbrake und underneath. That may be easier.
Posted: Mon Nov 05, 2007 5:03 pm
Just looked at your avatar and you may not have rear disc's......
So then I have no idea except the 4 bolts!
So then I have no idea except the 4 bolts!
Posted: Mon Nov 05, 2007 5:10 pm
hmm thats a bit of a pain then
is there any thinner oils you can use in the rear diff to to get the lsd to grip betta ??
is there any thinner oils you can use in the rear diff to to get the lsd to grip betta ??
Posted: Mon Nov 05, 2007 5:18 pm
Only use LSD oil but i'd suggest your LSD is long past it.