Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ENGINE MOUNTS

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 81
Joined: Fri Jun 16, 2006 10:37 pm
Location: vic

ENGINE MOUNTS

Post by madprk »

Engine Mounts on a L28 and the Engine Mounts on a P40 are they in the same position on the chassis.

If not the same how much difference is there as need some advice.

I would like to put a P40 into a short wheel base MQ. If any one can let me know if possible that would be great. :)
If it ain't broke don't fix it
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

firstly, WHY??? if ya gunna do an engine swap and wanna stick with mq engines, why not go the SD33???



2ndly, to my knowledge, the mounts do not change on the chassis between engine models.


3rdly, WHY???
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 81
Joined: Fri Jun 16, 2006 10:37 pm
Location: vic

Post by madprk »

I was half way through doing a motor swap for an injector ford 250 and auto when i got it in found that the tailshaft had no room and we need the car working by the 10Dec.

I have a long wheel base MK with perfect running P40 and 4 speed and thought i would do a direct swap if no difference in mounts.

It saves me buying a L28 or buying a complete MQ I will try and use what i have in my possession.

That is the only reason WHY as i need to get out of it cheap and quick before 10Dec
If it ain't broke don't fix it
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests