Page 1 of 1

Hi Pinon R&P Swap?

Posted: Wed Nov 07, 2007 9:28 am
by Remydog05
Ive a got a 4.1 HP front and and Hilux 4.8 with airlocker in it.

Can I put the locker and 4.8 gears in the High Pinon??

Re: Hi Pinon R&P Swap?

Posted: Wed Nov 07, 2007 2:57 pm
by RUFF
Remydog05 wrote:Ive a got a 4.1 HP front and and Hilux 4.8 with airlocker in it.

Can I put the locker and 4.8 gears in the High Pinon??
Yes and No.

The Locker can be used but depending on what model you may need to chase a couple of odd ball bearings to make it fit. RD23 will fit straight in. RD01 needs the oddball bearings.

The Gears will not fit as the high pinion is a reverse cut gear set meaning the pinion sits above the centre line of the crownwheel so the swipe of the gear is cut the opposit way to a low pinion.

Posted: Thu Nov 08, 2007 7:52 pm
by Remydog05
So I guess that pretty much scraps that idea!

So the only way for a 4.8 HP would be to find the Deisel Bundy Front which is suposed to be 4.8 & Prob cost LOADS!!!!!!!!!

Posted: Thu Nov 08, 2007 8:00 pm
by killalux
these are the cheapest i found, including shipping from US.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 82367&rd=1