Page 1 of 1
Diff Housing knuckles
Posted: Wed Nov 07, 2007 11:22 pm
by Z()LTAN
I have sand blasted my diff housing along with the knuckles. I can super etch and 2 pack paint the housing but can i also do that to the knuckles?
Is the paint going to be ok under the swivel seals?
I could chrome dip the knuckles...
Posted: Thu Nov 08, 2007 7:35 am
by dow50r
They come painted or coated in black from the factory...that wears off after a few 100k kms
Posted: Thu Nov 08, 2007 10:26 am
by bj on roids
i vote chrome the whole housing

Posted: Thu Nov 08, 2007 2:14 pm
by locktup4x4
I painted mine with no issues. Chrome would be trick.
Jason
Posted: Thu Nov 08, 2007 4:58 pm
by bazooked
definetly use etch primer and a top brand epoxy paint, it will stop ur balls rusting and vastly extend the seal life, ya might have to wet and dry ur balls and apply a few coats till its nice and smooth.
Posted: Thu Nov 08, 2007 5:19 pm
by 80's_delirious
bazooked wrote:ya might have to wet and dry ur balls
might be a good idea to sand back the ends of the diff housing too

Posted: Thu Nov 08, 2007 7:51 pm
by Z()LTAN
rofl!
Cheers fellas