Page 1 of 1
mini spools or full spools, and where to get?
Posted: Thu Nov 08, 2007 6:09 pm
by Red_Zook
as name suggests..
havening issues trying to find full or mini spools...
does any one know of online shops etx that sell them at a decent price???
Re: mini spools or full spools, and where to get?
Posted: Thu Nov 08, 2007 7:00 pm
by sloshy
Red_Zook wrote:as name suggests..
havening issues trying to find full or mini spools...
does any one know of online shops etx that sell them at a decent price???
Welding its cheaper
exactly the same effect
Posted: Thu Nov 08, 2007 11:47 pm
by Sic Lux
Posted: Thu Nov 08, 2007 11:51 pm
by bulldogy
Shoot me a PM i can get one in for you $325 au to your door.
Check it out here
www.locktup4x4.com.au
Dave
Posted: Fri Nov 09, 2007 3:55 pm
by Red_Zook
i was looking at them on ebay for $80 each...
i would usual weld.. but this is basicly gaurenteed not to break!
Posted: Fri Nov 09, 2007 5:19 pm
by bulldogy
If you can find 1 for $80 then get it i checked ebay couldnt find any under $129 US plus freight and you dont know the brand.
Posted: Fri Nov 09, 2007 6:30 pm
by Red_Zook
yeah im talking minispools... $80 sceems to be the going rate...
bit better than welding BUT.... when it comes down to it!
http://cgi.ebay.com.au/Holden-Mini-Spoo ... dZViewItem
Posted: Fri Nov 09, 2007 6:33 pm
by bulldogy
Id go a full spool over a mini spool esp for offroad serious stuff last you want is to take out the ring and pinion and a axle at the spline
Posted: Fri Nov 09, 2007 6:37 pm
by Red_Zook
bulldogy wrote:Id go a full spool over a mini spool esp for offroad serious stuff last you want is to take out the ring and pinion and a axle at the spline
yeah thats true.. i will put some thought in to it and get back to you
any discount for 2?
Posted: Fri Nov 09, 2007 6:47 pm
by bulldogy
Go to the site when you decide what to do and we can work something out, esp if we bring it in with a large order.
Dave
Re: mini spools or full spools, and where to get?
Posted: Sat Nov 10, 2007 1:05 am
by Tapage
sloshy wrote:Red_Zook wrote:as name suggests..
havening issues trying to find full or mini spools...
does any one know of online shops etx that sell them at a decent price???
Welding its cheaper
exactly the same effect
Ditto .. a good weld and work of course ..