Outer Limits 4x4 Board

Hi guys l have electric windows and it seems that the rear left window wants to keep going up and makes a racket when at the top.

Does anybody know why it is doing this or how to fix this?????


Cheers Chris

bit of crap in the switch or stuck switch

Na switch is fine, sorry didn't explain it to good.

With me operating the switch doesn't stop by itself like the others do....

sounds like a sticky relay but i didnt think they had seperate relays for each window , then again i havnt looked for any in mine

does your drivers window go up by itself or is automatic when you push the button right down

its aford not a nissan wrote:sounds like a sticky relay but i didnt think they had seperate relays for each window , then again i havnt looked for any in mine

does your drivers window go up by itself or is automatic when you push the button right down

l am not sure on idividual relays either.

Yeah have auto up and down on drivers window.

All the other windows stop at the top even with my finger still on the up botton execpt for the rear left window, gets to the top and keeps bangin away like it jumps a few teeth on the winder...

well the clunking sounds like what you said , the regulator is worn by the sounds of it and as for the window going up by itself im not sure

pull the trim off and check the power on the reg. With a multimeter. Play with the switches and see what happens! That way you can start to work out where ur problem lies

l only just put a new reg in it as the last one broke...

and is it wired properly, and not contacting metal at all?

there are no seperate relays for each window.. its all controlled by the black box in the drivers door.
my drivers door does the clunking thing (which is the worm drive on the motor slipping over the gear) because the window mechanisim is shagged and stiff, and this seems to confuse the black box occasionally. (dont let it keep doing the clunking thing as it gets worse untill the gears are stuffed)

make sure the window is free, and actually fully reaches the top of its travel (have somebody push it up while you operate the switch)

if i'm reading you right the winding mechanisim (thing with arm that pushes window up) and/or rubber seal is stuffed. also is the window surround damaged? as if it is bent it will also make the window stiff.

have you checked the teeth on the motor?

also what car?

Sorry it's a GQ wagon and it seems the wiring and seals are fine will check the teeth on the weekend......

SurfChris wrote:Sorry it's a GQ wagon and it seems the wiring and seals are fine will check the teeth on the weekend......

thought it was a patrol,
best to make sure...
let us know how you go when u check it out