Page 1 of 1
anyone have a snorkel template for a 7* series..
Posted: Sat Jan 17, 2004 2:06 pm
by robbie
I just picked up an airflow snorkel for the LHS.. just doesnt have a template..
Posted: Sun Jan 18, 2004 7:12 am
by Bundytime
just keep drilling holes to it fits, worked for me.......
or i can measure mine but its on the right hand side???
Posted: Sun Jan 18, 2004 11:19 am
by robbie
daniel..might have to just go nuts with the drill
you still got that spare LHS guard??
Posted: Mon Jan 19, 2004 6:38 pm
by BeZeRK
might have one at work, will check it out for you
Posted: Tue Jan 20, 2004 12:56 am
by robbie
thanks..
Posted: Tue Jan 20, 2004 2:37 pm
by bj on roids
the one i was promised wasn't in the kit when i bought mine
i used a old nutri grain box!! The cutout for the CD (freeCD with nutri grain) is the perfect size for the holesaw hole into your guard, mark the rest on the cardboard and then hold the cardboard against the car, and always remember:
BIG HOLES, little bolts!!
Posted: Tue Jan 20, 2004 4:12 pm
by MUSS
bj on roids wrote:the one i was promised wasn't in the kit when i bought minei used a old nutri grain box!! The cutout for the CD (freeCD with nutri grain) is the perfect size for the holesaw hole into your guard, mark the rest on the cardboard and then hold the cardboard against the car, and always remember:
BIG HOLES, little bolts!!
WHINGE WHINGE FARKEN WHINGE.....
went back and asked at the panel beaters shop bout that and they handed me a spare one but that was a month or 2 ago so i jst thru it out
Posted: Tue Jan 20, 2004 11:26 pm
by robbie
nice idea rob