Page 1 of 1
Cruise control & ABS with part time kit
Posted: Mon Nov 12, 2007 3:56 pm
by axle
I have fitted a Marks part time kit to my Transfer case on my 97 4.5 80 series problem is that my cruise control wont work as the cruise is wired to the ABS on the computer. also is there a after market kit that would get my ABS going that any one knows of as I dont know how my insurance will go with out ABS
Posted: Mon Nov 12, 2007 11:04 pm
by Sic Lux
Where are the wheel speed sensors on the front of these things (i'm almost new to the 80 world
)
Posted: Tue Nov 13, 2007 1:56 am
by Tapage
Did you modify the VSS in the rear joke of your t-case .?
Re: Cruise control & ABS with part time kit
Posted: Tue Nov 13, 2007 8:55 am
by hdj105
axle wrote:I have fitted a Marks part time kit to my Transfer case on my 97 4.5 80 series problem is that my cruise control wont work as the cruise is wired to the ABS on the computer. also is there a after market kit that would get my ABS going that any one knows of as I dont know how my insurance will go with out ABS
The ABS sensors are attached to the CV shafts, so as long as the CV's are stationary the ABS will not work.
I'm suprised the cruise control works off the ABS, as non ABS vehicles still used the VSS to run the cruise control. Perhaps you can find where the cruise obtains it's signal from the ABS and transfer that connection to the VSS?