Page 1 of 1
GU REAR DIFF INTO GQ
Posted: Tue Nov 13, 2007 2:21 pm
by poppeye
can yoy put a gu rear diff into a gq shorty what if so what needs to be modified to get this to happen
Posted: Tue Nov 13, 2007 7:53 pm
by poppeye
anybody come some one has to no
kysi
Posted: Tue Nov 13, 2007 8:05 pm
by KYSI
yeh u can should bolt strait in
Posted: Tue Nov 13, 2007 8:06 pm
by KYSI
well i just put a gu rear diff centre in mine bolted strait up bout to do my front
Posted: Tue Nov 13, 2007 9:23 pm
by poppeye
cheers wil teh centres out of my gq fit in there
...
Posted: Tue Nov 13, 2007 9:28 pm
by KYSI
well i put the gu centre strait in mine so im im assuming if one goes in one the other will go in the other one
Posted: Tue Nov 13, 2007 10:39 pm
by turps
Only real difference is that teh GU axle and housing is slightly wider. Other than that there the same center. As long as where talking H233 which is the smaller of the 2 diffs.
Not many GQ's with the H260.
But if swapping the entire housing. Then bolt in.
Posted: Mon Feb 23, 2009 7:55 pm
by bogged
and this one
Posted: Tue Feb 24, 2009 6:55 pm
by GUte
Flanges are different between GU and GQ.
Al.
Posted: Tue Feb 24, 2009 8:12 pm
by Tony WestOZ
GUte wrote:Flanges are different between GU and GQ.
Al.
I though all TD42`s had the same size flanges, the 3 litre ones are smaller.
Posted: Tue Feb 24, 2009 11:11 pm
by BIG GQ
Yes bolt straight in but if you are having rubbing issues on the rear now (???) you will only emphasize the problem with fitting a GU diff as they are wider
Posted: Wed Feb 25, 2009 9:21 am
by GUte
Tony WestOZ wrote:GUte wrote:Flanges are different between GU and GQ.
Al.
I though all TD42`s had the same size flanges, the 3 litre ones are smaller.
Maybe some. TD's might be the same.
When I changed my centres from two different sources I had to change the pinion flanges on both being from GQ's.
Al.