Page 1 of 1
whats it called and does any one have one???
Posted: Fri Nov 16, 2007 10:55 am
by Red_Zook
i have lost a bit from my clutch cable...
there is like a bit of 8mm round bar 15mm ish long with a hole though the center that the cable go's though...
then there is a special nut on the other side.....
well i have lost the dam bit of round bar... and i am 2 lazy to make one!!
whats it calleed? and does any one have a spair one?
Posted: Fri Nov 16, 2007 2:44 pm
by fool_injected
It's called a dooverlacky and no I do not have a spare one
Maybe you should try the thingyamajig shop the stock a lot of esoteric whatsitcalleds
Posted: Fri Nov 16, 2007 3:02 pm
by v840
I made one out of a bit of solid I had lying around. It was extremely difficult. I had to cut it to length then drill a hole through it. Took me most of the day.
Actually I still have it as I found the other one. if you really cant be bothered and dont mind waiting a few days I'll send it to you.
Posted: Fri Nov 16, 2007 5:00 pm
by Spike_Sierra
come to my suzuki parts department, i have one in stock, not a cheap item them....i will swap you for what i wanted, rotor?
Posted: Fri Nov 16, 2007 5:12 pm
by want33s
Suzuki part #09150-06014 Nut.
Posted: Sat Nov 17, 2007 1:10 pm
by Red_Zook
ZookStock wrote:go to a bike shop and buy one off them....... cheap and effective...
I nearly took bite to the heading and posted a tassie joke
good idea!!!!
i will do that...
brenno u can have a caliper u just have to go get it