Outer Limits 4x4 Board

G'day can someone please tell me how to adjust the camber of my RA rodeo. I've recently lifted it 2 inches using efs shocks and springs and had pretty bad negative camber.

So I flipped the balljoints and now I have positive camber not as bad an angle but still looks silly \ --- / so yeah if anyone can point me in the right direction as to how to adjust it I will be very happy.

Thanks in advance.

get a wheel alignment done

If the setup is the same as the previous models, the camber is set by adding or removeing shims from the upper control arm where it bolts to the chassis. Shims go between the chassis and upper control arm mount.
As mentioned above take it for a wheel alignment, they should be able to sort it out.

i've aligned these before easy as to do (used to be a wheel aligner in a tyre shop) like every one else has said take it to a tyre shop ask for a camber castor and toe adjustment