Outer Limits 4x4 Board

as above how have people made their ligthforce spotties fit in the arb bar??? please dont say buy smaller lights, cause its not gonna happen!!!
Will post pics of the problem area when my camera is charged.

Cheers Troy

are they charged yet.

we just welded little brackets up that used the arb holes and moved the lights forward an inch or two
cheers hugh

I got some LF170's that I would like to upgrade to 240's if ya really get stuck and can't fit the 240's on your bullbar...

dr who? wrote:we just welded little brackets up that used the arb holes and moved the lights forward an inch or two
cheers hugh

Do you have any pics, all i need to do is mount them forward like you say, but the mounting bracket on the light his the metal tube on the b/bar.

Will keep that in mind micky lux!

Cheers troy

Hi Troy
I have a high mout bar and to fit my hella 4000's I cut a piece of 25mm box section about 50mm long but cut it on a 45 degree angle at each end this then allows you to drill a hole on the bttom at one end and then one on the top at the opposite end then you can bolt this to the tab on the bar and then the light on the top doing this sets the light forward in the bar and stops them hitting the tube above hope this helps. I'm at ferny hills if you wanrt to see mine

Hi Troy
I had the same problem with my high mount bar with hella 4000's what I did is cut a section of 25mm box section, cut it on a 45degree at both ends then you can drill a hole in the bottom and one in the top at opposite ends this allows you to bolt onto the existing bar tabs with the top hole because of the 45 degree cut extends forward of the bar, you can then bolt the lights on. I'am at ferny hills if you need to see
Cheers Chris

80series chris wrote:Hi Troy
I had the same problem with my high mount bar with hella 4000's what I did is cut a section of 25mm box section, cut it on a 45degree at both ends then you can drill a hole in the bottom and one in the top at opposite ends this allows you to bolt onto the existing bar tabs with the top hole because of the 45 degree cut extends forward of the bar, you can then bolt the lights on. I'am at ferny hills if you need to see
Cheers Chris

GENIOUS, will give it ago, sounds like a plan

i would do but im without a digital camera at the moment, something im hoping father christmas might sort for me!!!
cheers hugh