Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Feroza Draws I Built

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Feroza Draws I Built

Post by Clint »

Thought I might put some pics up of the draws I have just finished building for the back of my Feroza.

Made em out of 20mm box section and exterior ply. Got the drawer runners off ebay and latches from a sheetmetal place in town.

I also made all new panels for the back as well, the old vinyl covered cardboard just wasn’t cutting it anymore.
I am quite happy with the results. :D :D

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 205
Joined: Wed Nov 21, 2007 1:56 pm
Location: Sydney

Post by Newtothefourbeworld »

wow that is really nice work.

the only part of that contruction that i prob cant do myself is welding the frame.

you dont happen to have the dimensions? then i could just get it made..........
Top
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

Newtothefourbeworld wrote:wow that is really nice work.

the only part of that contruction that i prob cant do myself is welding the frame.

you dont happen to have the dimensions? then i could just get it made..........
Thanks mate.

Na sorry i don't have any dims written down at all, i just built it as i went.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Nice work Clint- very professional finish.
David
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

A nice job - has inspired me to do it myself, again - eventually.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Ah - what about the rear "roll" bar ?
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

I took it out as it is only there to protect the back seat passengers.
I figured if there are no rear seats then no need for roll bar.

I used the lower mounting holes from the roll bar to hold down the back end of the frame.

If i ever put the rear seats back in then the draws will not be there and i will put the roll bar back in.
Its all just bolt in and out.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Ok - just wondered if it was an "option" that some didn't have.

Working around it would be most unpleasant so I can understand your choice - even if I will leave mine in.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

Yeah i think it would have been a PITA to build em around the roll bar.
Good luck if you have a crack at it. :armsup:
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 73
Joined: Mon Jun 05, 2006 9:52 pm
Location: caloocan phil

Contact:
Contact dennisdko

wow

Post by dennisdko »

nice project very clean
[img]http://img.photobucket.com/albums/v338/dennisdko/tonkajr2.gif[/img][img]http://img.photobucket.com/albums/v338/dennisdko/myferoza.gif[/img]
members.cardomain.com/koyingkiat
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 1 guest