Page 1 of 1
my mate just picked up a gen 1 paj
Posted: Wed Nov 28, 2007 10:35 pm
by j-top paj
$800 with 3 months rego
got 31s under it.
its a 2.6 with high Ks but doesnt blow any smoke or anything. it actually runs quite well
he has a spare astron2 motor for it and theres always my cordia motor
are there any things to look out for on the 2.6 versions?
the Xfer is stuck in 2wd for some reason.
the guy was saying it has something to do with the clutch? as the slave cylinder is leaking a little.
any ideas?
Posted: Wed Nov 28, 2007 11:23 pm
by j-top paj
are all Xfers the same? im thinking if we need to replace the xfer then we might as well stick some crawler gears in it while we are there
Posted: Thu Nov 29, 2007 9:49 pm
by Noisey
Your mate has an antenna growing out of his head....watch out that it does not get caught in trees - that would hurt.
Welcome him to the family.
Posted: Thu Nov 29, 2007 10:44 pm
by j-top paj
Noisey wrote:Your mate has an antenna growing out of his head....
didnt even notice the coathanger
Posted: Wed Dec 19, 2007 7:47 pm
by j-top paj
35s
we stuck my 35s under it to see if they fit, and they didnt scrub at all.
next step will be cut the guards to give it plenty of room, extend the bumpstops to limit uptravel if needed and get a set of crawler gears
Posted: Wed Dec 19, 2007 10:31 pm
by nottie
Hard for them to scrub with no travel
Posted: Thu Dec 20, 2007 5:25 pm
by Funky
hi there im new to this forum and just wondering what sort of lift did u do so it fits 35's ??
Posted: Thu Dec 20, 2007 11:31 pm
by j-top paj
nottie wrote:Hard for them to scrub with no travel
who needs travel if u weld the diffs
Posted: Thu Dec 20, 2007 11:34 pm
by j-top paj
Funky wrote:hi there im new to this forum and just wondering what sort of lift did u do so it fits 35's ??
we only really lifted it 1" by winding up the torsion bars a little.
only to fit it under and see if there was any scrub at full lock etc... on the street. and to see if the rim offset was good.
when he gets 33s we will cut the guards and lift it properly front and back etc...
then stick all four of my 35s under it and take it out for a run somewhere..
if all goes well then he will buy a set for himself.
Posted: Mon Dec 24, 2007 1:16 pm
by dans-paj92
wot do u mean weld the front diff?
Posted: Mon Dec 24, 2007 1:32 pm
by steven101
$800? Shit i want one
Posted: Mon Dec 24, 2007 2:00 pm
by NJV6
dans-paj92 wrote:wot do u mean weld the front diff?
Its a poor man's diff lock!
And effective in creating something marginal to drive.