Page 1 of 1
tps wiring diagram holden nissan
Posted: Mon Dec 03, 2007 11:41 am
by manni
just fitted 5ltr to gq used nissan auto can someone please tell me where to tap into tps holden 5ltr to nissan auto ,thanxs
Posted: Mon Dec 03, 2007 4:53 pm
by Bartso
i don't believe you can you have to mount the nissan tps on to the motor i think when i did it the resistance of the holdens tps is different to the nissan one
Posted: Mon Dec 03, 2007 10:15 pm
by PGS 4WD
The origional center wire from the TPS loom Nissan, the loose connector not the one on the TPS, is the Nissan reference.
You can hook into the TPS ref voltage (blue wire I think) its the one that varies from about .7 to 4.5 v as you open the throttle, at the throttle sensor. You won't have an idle switch though so the overrun clutch wont engage on decel so it will feel a bit like it drops out of gear at some speeds on very light throttle.
Cheers
Joel