Outer Limits 4x4 Board

i got a 96 mk triton that decided today not to change gears, it will go into any gear (5 speed man) with the motor off.

i thought the clutch fluid was the pulprit but after bleeding the clutch line, it hasnt made any difference.


any ideas ?....

It won't go into any gear with your foot on the clutch and motor running...... Is that right?

Does the gear lever physically move into the gear with the engine on or off?

Does it work if you put it in 1st then start it and operate it without a clutch?

It won't go into any gear with your foot on the clutch and motor running...... Is that right?

yep thats right!

Does the gear lever physically move into the gear with the engine on or off?

doesnt move with the engine on but with the engine off it moves freely into all gears

Does it work if you put it in 1st then start it and operate it without a clutch?

yeah thats how i got it home.

You bleed it at the slave cylinder.... And the rod from the slave cylinder moves when someone puts their foot on clutch.....?

yeah, bled it at the slave, i cant tell if it moves or not as im alone. once the missus gets home ill get her to pump the pedal and ill know wether the lever moves

ok the lever was moving as it should, so i suspect that the slave cylinder is leaking or the pressure plate has collapsed and isnt allowing the clutch to disenguage

ok master cilynder was leaking.... not the slave, and the pressure plate was missin a sht load of teeth