Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

battery charger regulator kit from Jaycar KA1795

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

battery charger regulator kit from Jaycar KA1795

Post by trains »

Hi chaps.

Has anyone used the jaycar battery charger regulator that comes in kit form ??

https://secure4.vivid-design.com.au/jay ... =&SUBCATID

I have a 4a continous, 8a rms charger. its an arlec ps 588 charger.

Im not sure if the 8a peak could damage the board.

cheers

Trains
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Had the kit for like two years but have got around to it :roll:
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Bought one, built it, don't use it. Having read the description of how it works, and made some measurements with it operating, I don't trust it.

I use the el-cheapo 4A Arlec charger for "fast" charging (as fast as a 4A Arlec can charge :roll: ) and swap to a regulated 13.8V supply ($99 from Jaycar) if I want to float charge.
Top
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

Post by trains »

Scott,
I too read the destructions, and saw the bit about setting it up before use.

What gave you trouble and lead you to not trust it??

are they crap parts in the kit, or does it not do what it's claimed to be able to do??

Trains
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

It's going back a few years now. :? From memory, when set up according to the instructions I thought the "regulated" voltage was still way too high.
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

Had one, ditched it. Buy a solid state 3 stage charger from super-sh*t for $70

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

Post by trains »

Why didnt you adjust it so it was lower, or was there no adjustment left to go lower??

T

If its still around, can you mail it over, ?
Let us know what you would like for it.
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Buy a CTEK from Rudi http://www.navrun.com.au/battery.htm
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest