Page 1 of 1
1UZ Sump
Posted: Wed Dec 05, 2007 5:40 pm
by Grublux
I have purchased the rear bowl sump from castlemaine rod shop for my 1UZ conversion into a hilux and I am looking for some photos or ideas on what people might have done 'baffle wise' to stop all the oil flowing away from the pick-up when on a down-hill slope.
Thanks
Posted: Wed Dec 05, 2007 6:53 pm
by MissDrew
I haven't done anything, when going down STEEP hill my oil pressour goes real low, as soon as you give some gas its back again.
Did you workout your dip stick mate?
Posted: Thu Dec 06, 2007 8:27 am
by bj on roids
How much was the sump?
pics?
Whats up with the dipstick?
I ran the dipstick off a different breed of motor and it seems fine...
Posted: Thu Dec 06, 2007 11:02 pm
by kranked_dirt
What needs to be done to the dipstick? I just put a rear sump on mine and used the dipstick that came with it... is there something wrong with this?
Posted: Fri Dec 07, 2007 11:47 am
by bj on roids
kranked_dirt wrote:What needs to be done to the dipstick? I just put a rear sump on mine and used the dipstick that came with it... is there something wrong with this?
maybe he had an aftermarket exhaust or other clearance issues....
Posted: Fri Dec 07, 2007 5:15 pm
by kranked_dirt
ah okay fair enough, i didn't think of that
1UZ
Posted: Sat Dec 08, 2007 4:22 pm
by Grublux
The Castlemaine Rod Shop Sump is about $700 from memory and they modify your pick-up for you.
The sump
The modified pick-up
I had an external tube for the dipstick going into my original sump (1UZ from a Celsior) so the tube needed to be cut to the right length so as the dip stick would sit at the right depth when put through the hole in the block at the back
Cut dipstick tube
And the dipstick sitting in it's final resting place