Outer Limits 4x4 Board

Posted: **Sat Dec 08, 2007 8:09 pm**

hi all just got this today but think i may need to get a new body
and moter

the good

the bad

Posted: **Sat Dec 08, 2007 8:30 pm**

I agree , it's shagged , Cheers Paul.

Posted: **Sat Dec 08, 2007 8:56 pm**

Looks like a days work to replace motor and door and pull out and paint sill.

How did the rock/tree wreck the sill AND the engine?
It's a bit hard to tell from the pics but if the body is as clean as it looks I'd be repairing it not dumping it.

Posted: **Sat Dec 08, 2007 9:02 pm**

well someone ran into the side of it in a car park
then the person i got it off floged the crap out of it
and stuffed the engine

Posted: **Sat Dec 08, 2007 9:59 pm**

you need a new motor but the rest will buff out

Posted: **Sun Dec 09, 2007 6:25 am**

ebay Item number: 200182298711
should get it cheap

Posted: **Sun Dec 09, 2007 1:00 pm**

Hi, did you buy this car from hurstbridge? I'm pretty sure this is the car. i was looking to get it. he had it in the trading post for 3.5k. then i called and he said it was sideswipped and he blew the motor all in a matter of weeks! hard luck :(

He told me he wanted about $900 for it which is a not bad price considering the gear it has on it

P.S Hi all, this is my 1st post on the forum

So i'll just say hi, names Andrew. still looking to buy my 1st sierra.

Posted: **Sun Dec 09, 2007 1:31 pm**

want33s wrote:Looks like a days work to replace motor and door and pull out and paint sill.
I'd be repairing it not dumping it.

It looks a bit more shaged then just a door

it looks like before and after the door has significant damage aswell as the floor,

Posted: **Sun Dec 09, 2007 4:27 pm**

Can you open and shut the door?

Will you be using it for wheeling?

If it opens and closes to be hounust i would just keep it!

Posted: **Sun Dec 09, 2007 4:30 pm**

Danzo wrote:
want33s wrote:Looks like a days work to replace motor and door and pull out and paint sill.
I'd be repairing it not dumping it.
It looks a bit more shaged then just a door
it looks like before and after the door has significant damage aswell as the floor,

Thats why I said REPLACE the door and PULL OUT the sill. That little dent in the quarter will pop when the sill is pulled out.. It is only tin.
Panelbeating isn't hard but it does daunt the inexperienced.

Posted: **Sun Dec 09, 2007 6:54 pm**

the door opens and closes
if i can get the sil fixed ill just bye
a new door for it
it is for going wheeling but need to do a RWC
on it and in my name

and yes it is from hurstbridge but not for $900

Posted: **Sun Dec 09, 2007 8:48 pm**

YES got a new body so when i get it home ill have some stuff up for grabs

:armsup

:

Posted: **Sun Dec 09, 2007 8:58 pm**

Whats all the funny stuff in the engine bay? green water in the bottle... Blue pipe and a wind up thing????

Posted: **Mon Dec 10, 2007 10:27 am**

Wind up thing looks to be a jack...green water in the bottle would be coolent,but dunno about the blue tubing!

Posted: **Mon Dec 10, 2007 10:38 am**

Stock-man wrote:but dunno about the blue tubing!

I'd say a gates radiator hose

But yeah throw that jack out put a compressor there.

Posted: **Mon Dec 10, 2007 10:45 am**

Stock-man wrote:Wind up thing looks to be a jack...green water in the bottle would be coolent,but dunno about the blue tubing!

A serious answer.

It was a joke mate!

Posted: **Mon Dec 10, 2007 2:01 pm**

Posted: **Mon Dec 10, 2007 6:48 pm**

how do i take the frunt grill off my zook
there is 2 screws on each side that i cant get 2

Posted: **Mon Dec 10, 2007 7:53 pm**

find a bigger hammer =)

Posted: **Mon Dec 10, 2007 7:58 pm**

lmao why dident i think of that thanks

Posted: **Tue Dec 11, 2007 7:18 pm**

umm there not screws just small lugs

Posted: **Tue Dec 11, 2007 9:15 pm**

the horn wont go is this a prob with all of them??
any help would be good

Posted: **Wed Dec 12, 2007 4:27 pm**

over land 4x4 wrote:the horn wont go is this a prob with all of them??
any help would be good

no but they are cr*p
if the wiring is ok just buy a new horn or get some
AIR HORNS to run of the new compresser

Posted: **Thu Dec 13, 2007 4:15 pm**

its going in for a RWC tomorrow
but i need to get the fan going is there some prob with them or is it just mine and the horn is going just put a new one in (its the fan in the car for the heater)

Posted: **Thu Dec 13, 2007 4:52 pm**

havent you got 2 sierra's now? just use the one that works

unless there both busted

Posted: **Fri Dec 14, 2007 3:30 pm**

ummm well both seem to be not going
im going to try and pull one out on the weekend

any way just got car back and all it needs for a RWC is

left hand head light (need to get one as there not the same ones in my other car)

wiper blades (eazy ill just bye a set)

screen demist (hard the fan wont go )

brake fluid low (eazy)

r/h door handle (eazy got one)

the screen has a small scratch (this one is bull @#$* it is so small that its not even there its only 5 mm long and not in frunt of the driver)
(i hope it will buff out)

Posted: **Fri Dec 14, 2007 7:16 pm**

ok not much left to do
after a lot of them four leter words i got the fan to work

juat got to fix the left hand head light
and the screen

Posted: **Sun Dec 16, 2007 6:45 pm**

oh no what have i done there is 100 parts all over my shed
i took the body off my zook now i dont no if i shoul get it fixed
or make a trailer out of it and sell off what i dont need

Posted: **Sun Dec 16, 2007 8:56 pm**

if ya got the room (try and make some!!)
keep it for spares,

Posted: **Mon Dec 17, 2007 3:42 pm**

should i chop it and make a trailer out of it ?????

IMG]http://i273.photobucket.com/albums/jj21 ... 170013.jpg[/IMG]

if i chop it ill do it at the seat belt line
what do you all think COOL or NOT SO COOL

Outer Limits 4x4 Board

i think i need a new body

i think i need a new body

i got a new body

how do i

the horn

Re: the horn

the fan

ummm welll

allmost

wow

what do you think