Outer Limits 4x4 Board

Trying to help a freind install a Warn XD9000, but he has no instructions.

On the winch there are 3 marked terminals (A, F1 and F2). One is unmarked, which I have termed ?X.
I need to know;
What attaches to terminal A
What attaches to terminal ?X

Now for the solenoid box.
There are 4 wires that come out, 3 are still marked from the factory (F1, F2 and motor ground). One is not tagged, it is the thickest black wire. I have called this ?Y, what does this attach to

And finally to power the winch
What does the pos (+) battery lead attach to
What does the neg (-) battery lead attach to

Edit: I take it that the leads F1 and F2 attach to terminals F1 and F2 on the winch, is this correct?

PS if anyone still has their instruction booklet or wiring diagram, that would be tops.

from controller box
F1 is + Battery
F2 is earth battery
Y goes to A on the winch.

the rest Fuck knows.

Bogged;
Are you saying that the wires F1 and F2 from the Solenoid box don't attach to F1 and F2 on the winch??

Matt N wrote:Bogged;
Are you saying that the wires F1 and F2 from the Solenoid box don't attach to F1 and F2 on the winch??

apologies, I will take photos of mine in the morning, I think you could be right, but not sure now...

Im sure the power wire came from the controller box, but will take photos in morning. I have warn 10k.. hope tis the same

Well you will know if it runs backwards.

I've got a 9000xi, I'll check for you in the morning Matt.

X is the winch ground, it goes to either the - on the battery or striaght to the frame, doesn`t matter which as long as its a good earth.

Y goes to A and F1 and F2 go to F1 and F2 if the winch goes in when you are pressing the controller to go out then just swap F1 and F2 around.

Motor ground (small wire out of controll box) is the earth for the solinods it just goes to either the - on the battery or to the frame doesn`t matter which as long as its a good earth.

Then you should also have a bigger cable coming out of the controll box, this is the + to the battery.

If you look in my solinod box (pic) the top cable is the + from the battery. The bottom cable (has 11 on it in black) goes to the A on the winch. The two cables in the middle are F1 and F2, I didn`t look to which one is which but as these are only the in out cables/terminals. All small cables that come into the left of my controll box are just going to the dash switches and the hand controller plug. The white one coming in from the left is nothing to do with the winch.

Guts that sounds about right i have a manual that i could scan tonight if it still does not work, infact i think ill scan it ne way make a pdf and ruff to put it on the server somewhere for all to access.

Guts: thanks for that.

infact i think ill scan it ne way make a pdf and ruff to put it on the server somewhere for all to access.

Spazbot: thanks mate, that would be the business

Quite simple really,

Y goes to A,
x is battery negative and motor ground is earthed to body, while f1 and f2 go to their corresponding terminals.