Page 1 of 1
bobtail 110
Posted: Thu Dec 13, 2007 5:36 pm
by defmec
Posted: Thu Dec 13, 2007 5:38 pm
by defmec
whats your thoughts
Posted: Thu Dec 13, 2007 7:32 pm
by shakes
looks shit hot, go do it
Posted: Thu Dec 13, 2007 8:15 pm
by defmec
hardest thing to do is finding a place for the fuel tank
Posted: Thu Dec 13, 2007 11:44 pm
by Slunnie
I like it!
Posted: Fri Dec 14, 2007 2:50 am
by red90
defmec wrote:hardest thing to do is finding a place for the fuel tank
Use a 90 tank or an aftermarket 110 side tank.
Posted: Sun Dec 16, 2007 7:24 am
by Mark2
red90 wrote:defmec wrote:hardest thing to do is finding a place for the fuel tank
Use a 90 tank or an aftermarket 110 side tank.
Locating the filler might be a challenge!
I'd use a custom internal tank in the rear of the tub and make a flat floor.
Posted: Mon Dec 17, 2007 7:19 pm
by Zombie
Get choppin man! looks awesome.
Posted: Mon Dec 24, 2007 1:35 pm
by ROVERNIT
hahahaha has any body done it to Disco bob tail Disco
Posted: Mon Jul 28, 2008 8:13 pm
by defmec
got the fuel tank started today its goin to be 3mm alloy and will hold 90 ltrs im putting it in the rear footwell so the floor is flat all the way thru and the tank will go 120mm thru the floor and sit between the chassis and the prop shaft the filler will be the hard part probly have to go thru under the seat ...how do ya think i will go legal wise
Posted: Mon Jul 28, 2008 11:26 pm
by jbell
Theres a blue one on portalrover.co.uk
its ok looks abit weird..
Jeff
Posted: Wed Aug 06, 2008 3:12 pm
by modman
long range automotive make sill tanks for 90's and 110's they are profiled up on the wings for clearance around the sills. fillers can go just behind the rear door. can use just one filler and a transfer pump.
i remember the tanks were 70 litres, drivers side (no toolbox) 60 litres passenger side (battery box). i don't love using valuable interior space for fuel and lifting an already good COG. but if you can fab then put the tank inside and spend the money on stuff you can't do
david
Posted: Wed Aug 06, 2008 5:50 pm
by defmec
put on hold due to engine difficulty's