Page 1 of 3

THE half door pics thread!

Posted: Fri Dec 14, 2007 9:29 am
by Dee
Post up pics here of your half doors for ideas/designs of cutting down or fabbing up some half-doors for your sierra! Also feel free to ad pics of your hinge/locking mechanism!

Posted: Fri Dec 14, 2007 9:51 am
by want33s
Image
I made new inner trims too... 25mm high density blue foam covered in vinyl. No handles or winders to get hurt on.

Posted: Fri Dec 14, 2007 9:58 am
by grimbo
hinge is just standard as it the locking mechanism

I just used expanding foam to fill the gap, sanded it back and then capped it with rubber

Image

Posted: Fri Dec 14, 2007 10:39 am
by "CANADA"
Will be building some more when I get a hold of a new zuk...

Standard hinge, and no latch as of yet, but a bolt thru the standard latch hoop worked good enough...


Image

Posted: Fri Dec 14, 2007 1:19 pm
by waxhead..
when I get a hold of a new zuk...
what happened to that sierra?

Posted: Fri Dec 14, 2007 4:21 pm
by "CANADA"
waxhead.. wrote:
when I get a hold of a new zuk...
what happened to that sierra?

Moral of the story, DO NOT trust anyone, business or single person ;)

Posted: Fri Dec 14, 2007 4:39 pm
by Dee
sounds bad madzuki... :?

anyway, i kinda like these ones (well the whole rig actually :D )

Image

Image

Posted: Fri Dec 14, 2007 4:54 pm
by mrRocky
i dont looks like a jeep

Posted: Fri Dec 14, 2007 5:05 pm
by NIK
I,ll post mine up when I get them back but very similar to grimbos but capped with steel with lift off hinges (if you do this make the bottom pin longer than the top to make them easier to get on) and Im using the stock inner handle moved down a bit.
Nik

Posted: Fri Dec 14, 2007 5:10 pm
by CHOPS1
I'm a fan of these tube doors, no doubt illegal here in oz.
Off of zukicrawlers
Image

chop

Posted: Fri Dec 14, 2007 7:24 pm
by alien
i recall reading that because zuk doors dont have any side intrustion protection in them, and most are rego'd as utility vehicles, you can infact have a tube door - so long as the driver cant "fall out" its fine - but you'd likely have to get it approved by an engineer...

Posted: Fri Dec 14, 2007 8:17 pm
by Rhett
mine. The handle has been cut out and moved down still fully functional but with no inside handle
http://i80.photobucket.com/albums/j199/ ... C01192.jpg
http://i80.photobucket.com/albums/j199/ ... C01180.jpg

Posted: Fri Dec 14, 2007 8:21 pm
by want33s
Image
Image

Posted: Fri Dec 14, 2007 9:30 pm
by sanger
i Used standard hinge and toyota corrolla locking mechanism. Works a treat in the rocks picking lines and dont look too bad either.
Image
Image
Image
Image

Posted: Sat Dec 15, 2007 3:10 pm
by Dee
CHOPS1 wrote:I'm a fan of these tube doors, no doubt illegal here in oz.
Off of zukicrawlers
Image

chop
why illegal? I past a black TJ this morning in brisbane with similar tube doors on it...

Posted: Sat Dec 15, 2007 6:06 pm
by NIK
Just cause someone does it dosnt make it legal ;)
Im sure (but not 100%) that in nsw if you dont have side intrusion bars you can take your doors of but thats not to say you can make your own. Having said that Ive also read that if you do there has to be an inside and outside handle (but this my have been in comp rules cant remember :oops: )
Im just going to whack mirrors on mine put them on and try my luck, the rest of my rig is engineered and if it comes to it I could just pull em of with the quick release hinges "what modified doors orificer" as its legal with them off :cool: well I,ll try anyway.
nik

Posted: Sat Dec 15, 2007 7:14 pm
by "CANADA"
If it has external hinges and no side intrusion bars, then aparently you are allowed to run half/tube doors...

Posted: Sat Dec 15, 2007 11:17 pm
by Gutless
MADZUKI wrote:If it has external hinges and no side intrusion bars, then aparently you are allowed to run half/tube doors...

Thats what I was told too, but good luck arguing the piont when DOT pull you over...... :D

Posted: Sun Dec 16, 2007 10:59 am
by bj42turbo
Do they have to be for a suzuki :D Still the same idea i guess



BJ



Image

Posted: Sun Dec 16, 2007 12:08 pm
by GRPABT1
This may sound dumb to those that know but do any of these still retain window movement? Or window glass at all?

Posted: Sun Dec 16, 2007 12:13 pm
by muz_ook
GRPABT1 wrote:This may sound dumb to those that know but do any of these still retain window movement? Or window glass at all?
no windows at all..................

Muz

Posted: Mon Dec 17, 2007 9:34 am
by "CANADA"
GRPABT1 wrote:This may sound dumb to those that know but do any of these still retain window movement? Or window glass at all?

A frame and plexy sheet were the next step for mine... quick to remove, and still have your visibility in the rain :D

Posted: Mon Dec 17, 2007 11:03 am
by St Jimmy
:oops: i know a dumbo who threw a set of drover half doors to the dump :oops: also my lj50 had side bars so when you took the doors of you had a bar to act as your door :D ill try to find some pictures of my old zook. boner

Posted: Mon Dec 17, 2007 11:10 am
by GRPABT1
Do drovers come with half doors standard?

Posted: Mon Dec 17, 2007 11:12 am
by grimbo
GRPABT1 wrote:Do drovers come with half doors standard?
they're sort of half doors. Basically they just a soft top section instead of a glass window. Not all came this way just the very early ones I believe

Posted: Mon Dec 17, 2007 11:17 am
by St Jimmy
85 model softop thats what it was on :lol:

Posted: Mon Dec 17, 2007 11:49 am
by Dee
Image

Posted: Mon Dec 17, 2007 12:02 pm
by Dee
Image

Posted: Mon Dec 17, 2007 12:37 pm
by Dee
Image

Image

Posted: Mon Dec 17, 2007 12:46 pm
by GRPABT1
How a bout some pics of the interior trim of these half doors?