Page 1 of 1
100 series abs bleeding breaks
Posted: Sat Dec 15, 2007 11:46 pm
by scottmcguinness172
hey all i need to bleed my brakes as i changed all the brake lines is there anything special to do or is it just the same a doing a non abs car? just start at ur furthest away brake and work ur way in? and keep fluids up
Posted: Sun Dec 16, 2007 2:57 pm
by Sic Lux
Is it the electric booster or vaccum
Posted: Sun Dec 16, 2007 4:03 pm
by scottmcguinness172
im not sure mate im guessing its vaccume
Posted: Sun Dec 16, 2007 10:33 pm
by Sic Lux
On the Resivior cap does it say use only dot 5 fluid or does it say dot3 or 4 fluid. If it say dot 5 don't put your normal dot 3/4 fliud it'll cost heaps to fix it.
Posted: Mon Dec 17, 2007 7:49 am
by scottmcguinness172
thanks ill check it out today i havnt put the new brake lines on yet
Posted: Wed Dec 19, 2007 7:50 pm
by rodrocket
greetings all
i was looking ata 100 series today & noticed all the electric's on the master cyl
what is involved to bleed the electric system
regards
rod
Posted: Thu Dec 20, 2007 8:23 am
by hdj105
Dot 3 fluid only.
Fronts as per normal.
Rears ignition must be on and no need to pump pedal, simply depress pedal and crack nipple and a constant stream will evolve.
Posted: Thu Dec 20, 2007 1:48 pm
by rodrocket
thanks for that Greg
much appreciated
regards
rod