Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cleaning up engine?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 180
Joined: Thu Apr 27, 2006 7:15 pm

Cleaning up engine?

Post by hilux_bondy_007 »

Hey i got a import 1 uzfe and the chemical used to clean it are have corroded and i was wondering wat would be best to stop it and make it looking new.

Is painting it an option and where would do that or wat paint?
Top
Posts: 100
Joined: Mon Jun 12, 2006 10:00 am
Location: Redbank Plains

Post by ferret »

I use Super Cheap degreaser, and then give everything a liberal coating of silicon spray and/or Lanox and then just wipe of the excess with a rag. The silicon and Lanox will prevent corrosion and make everything look shiny and new for you.
Top
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Post by TheOtherLeft »

I've had that some problem as well. I cleaned my engine (alimumium) block with really strong degreaser and now it has etched into the head.

I then used a scourer to clean it off which it did, but now there's green scourer leftover remaining. It now looks like corrosion :?

I think I need to scrub of the green crap now.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests