Outer Limits 4x4 Board

Hi there, I am looking for information on a performance engine, I have a motor in bits that i am building up and looking for engine specs,
the stuff I am looking for is
1 specs on a cam grind, lift and duration. (fly cuts in pistons to clear new cam grind)
2 how much to machine off the pistons to reduce compression and to what compression ratio, (for added boost)
3 turbo type and size
4 fuel pump delivery, 12mm plunger and toyota or (komoto)? pump head.
5 injecter flow specs and crack pressure
6 head work, porting , back cut valves and seats, heavy valve springs,
7 diesel gas on top of all this. the new kit using a computer,
thanks all Phill.

ring matt from kowari in townsville, i think he has a TD42T forsale
its been bombed off it head .... you'll be able to buy it from him cheaper then what you'll build one for


(07) 47747577

(07) 4030 9500

I will be building my own motor, I am not looking to buy one set up!
i have done a search and turn up some good stuff but still looking for some finer details, cam specs, fuel flow, air flow,
cheers Phill.

Not many people are going to tell you there tricks of the trade.

CHOOFA wrote:Not many people are going to tell you there tricks of the trade.

x2. not after the spent the hard erned a few times to get it rite.