Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hdt turbo on a 1hz engine

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 101
Joined: Tue Mar 08, 2005 4:59 pm
Location: weipa

1hdt turbo on a 1hz engine

Post by kingchevy »

Hey guys
I have a 1hdt turbo exhaust manifold and all the extras of a motor we were wrecking. Will the turbo manifold ect fit straight onto a 1hz engine with out any modifications?
WEIPA RACQ MECHANICAL AUTO ELECTRICAL PARTS
75 series 6.5 V8 diesel locked & lifted
79 series turbo diesel chipped almost locked and lifted
http://www.exploroz.com/Directory/Customer/1138.asp
Top
Posts: 62
Joined: Sun Aug 21, 2005 6:56 pm

Post by dogoff »

The exhaust gasket part numbers are the same
so should be ok
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

Yes, it all fits.

This is a 1hdt turbo/manifold onto a 1hz... little advice, i found that the manifold and turbo exhaust housing have to be bolted onto the engine in one piece, I dont remember why though.
Image
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Pity you dont use the head and pistons aswell, then its a hdt :)
Top
Posts: 110
Joined: Tue Aug 15, 2006 7:57 pm
Location: Newcastle

Post by nads »

dow50r wrote:Pity you dont use the head and pistons aswell, then its a hdt :)
almost. throw on the 1hdt fuel pump too. ;)
Top
Posts: 101
Joined: Tue Mar 08, 2005 4:59 pm
Location: weipa

Post by kingchevy »

Can you interchange the injector pumps??
WEIPA RACQ MECHANICAL AUTO ELECTRICAL PARTS
75 series 6.5 V8 diesel locked & lifted
79 series turbo diesel chipped almost locked and lifted
http://www.exploroz.com/Directory/Customer/1138.asp
Top
Posts: 128
Joined: Mon Oct 23, 2006 5:29 pm
Location: Melbourne

Post by rezpkt »

more to the point, is the 1HZ injector pump sufficient just by cranking up fuel supply and then a dyno?
Or completely recalibrate?

sorry for the slight highjack, this is something im looking at doing later too.
Team: Cause For Concern
http://www.offroad80s.com
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Nads is right, you need the dt pump as the timing is all different...
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest