Outer Limits 4x4 Board

Long story short I'm replacing my brake rotor and pads on my GQ, got the pads and rotors from a "proper parts shop" and they have farked up and given me rotors for 2 piston calipers.

Silly me didn't check them before bolting them up and only found they were wrong when the caliper bracket wouldn't fit.

I don't trust them to give me the right ones now, the P/N they gave me is DBA623 I think i need DBA329 but I want to make sure before I go there again tomorrow. Can some one confirm this is the right P/N.

Car Details

GQ 4.2 Petrol Carby LWB
Build: Nov 91
Spec: DX (drum rear)
Single piston calipers

Cheers
Brendan

look for a brake thread by GUjohnno recently, he replaced his with slottted DBA's

Already found that, but there is no mention of what part number he got/used.

DBA's website has all the part numbers with descriptions in a PDF file.

Ive looked at their site too, Im not sure whether I need the DBA622 or DBA329, my car fits into both these descriptions?


MQ 160, Classic 160 1/81 - 12/87
DBA329

GQ Y60 non EFi 1988 - on
DBA329

Safari X60
DBA329

GQ Y60 EFI TB42E 2/92 - on
DBA623

GQ Y60 ALL 1988 - on
DBA622


Brendan


EDIT: Just looked at the PDF again the DBA622 is Rear disk. Im going to go slap myself now.

EFI should be the lager disks with 2 piston calipers, all other disks should be the same