Page 1 of 1
after maket front radius arms
Posted: Wed Jan 02, 2008 5:54 pm
by pro093
i have a set of 2dextrem 6inch arms but want to lower it down to 4 inch .
will it still drive ok or do i have to change the arms
Posted: Wed Jan 02, 2008 8:03 pm
by nastytroll
they drive fine mate, the wagon we came in to get the bonnet runs 6 inch arms n 4 inch coils, been that way for 3 years, done 150 000km like that.
Posted: Wed Jan 02, 2008 9:18 pm
by pro093
thanks for that i,ll give it ago!
Posted: Wed Jan 02, 2008 9:29 pm
by mavzilla
If its a gq you may have caster shake problems with 2 much caster.
3 degree bushes and 1 inch coils and it shook its head off(my experience)hope it helps
Posted: Wed Jan 02, 2008 9:59 pm
by mud4b
depends what vehicle it is, i have these with a 4" lift in a 80 series, it is a major problem in the caster, i fixed it by using a x-link (still had to chop it several times to get it right.
cheers mark
Posted: Wed Jan 02, 2008 10:07 pm
by pro093
its for a GQ
Posted: Wed Jan 02, 2008 10:49 pm
by Nelso
I've got 6 inch snake arms and 4 inch springs and it drives fine.