Page 1 of 1
prado rear diff center in front of a 100 series
Posted: Sun Jan 06, 2008 7:12 pm
by scottmcguinness172
hey all i have a 100 series apparently it has a prado rear diff in the front of my 100 series and i happend to blow a cv today can anyone give me some info or if someone has done this to there 100 series its a solid axel model 1998 any help would be great
Posted: Sun Jan 06, 2008 7:48 pm
by MUD000
All I know is there bloody $$$$$$$
Could not find a secondhand one & bought a factory set of axles & CV's
About $2500 all up
Know I've got a spare set if I break one
Cheers Dan
Posted: Sun Jan 06, 2008 7:53 pm
by scottmcguinness172
so what cvs do u buy 100 series landcruiser ones or 79 series ones
Posted: Sun Jan 06, 2008 9:32 pm
by JOHNZ
it's not the same diff.
it's the same size diff.
Get 100s cv . 79 & 100 have same diff but not sure on cv
Posted: Mon Jan 07, 2008 5:12 am
by MUD000
Nah I'm running 100 series diffs
Should of just put 80 series in could of bought 2 sets of longfields for that
Plus I had to ut new CW&P in new seal & Berrings & new AIr lockers
Cheers Dan
Posted: Mon Jan 07, 2008 7:02 am
by treebruiser
I bought a complete front diff housing, cv's, brakes, centre - everything for $750. same model, solid axel 100.
I'm pretty sure the outer shaft spline is different between the full time 4wd and the part time unit, check this before you buy it.
Someone else may confirm but I'm also pretty sure that the base model 80 and 100 have the same housing and therefore may have the same CV's
Andrew, (dow50) has a couple of spares i think.......
Posted: Mon Jan 07, 2008 8:11 am
by bj on roids
its got a high pinion diff, not out of a hilux or prado.. funnily enough its out of a toyota...
same size crown wheel as hilux and can be used in hilux housing with some minor work.