Outer Limits 4x4 Board

hi all just after someone who might be able to set my front diff centre up in brisbane at a resonable cost. ive got the centre apart with all the new bearings and pinion seal to put back in , i just dont know the specs for reassembling such as the pre loads, pinion hieght ect, ive made some calls to a few rover specialist n are looking at 400 skins to just assemble a diff centre to correct specs,

any help appreciated luke

Hey Luke

I had Rick's at Nerang do mine when I fitted the 4.11's.... was a little cheaper then that from memory.

Drove down your street the other day...it has changed so much since I lived there.


Cheers

Andrew

hey luke,

mate have you rang j.c?

i'm thinking at the moment of dropping one of his strocked 3.9's into my 90, he did some work on yours didn't he?

cheers mud, on the reciept it was last rebuilt at ricks when the last owner sold it to me n ive only done bout 50 000kms since then, the prblem of chipped crown wheel and shagged pinion bearings and seal is because the pinion bolt was not lock tighted and the bolts come loose and caused all sorts of norty things, yea the house is a bit diffent but far more activety on the inside n down stairs the last 6 months.

cheers luke

Mate, try Mobi Diffs & Gearboxes on 38084576. Location is Springwood.

Peter K

cheers for that im taking it into mobi diffs on monday at spring wood n hes given me a more relistic price,

hart transmisions @ brendale they are the goods!!!