Outer Limits 4x4 Board

Can anyone help me??

I don't get any ignition on the 3:rd cylinder.

I have bougt new Sparkplugs. Sparkplug-cables, distribute cap. and distributer.


I have skifted sparkplugs with the 6:th cylinder. The fault remaines on the 3:th cylinder.


then i skifted nozzels with the 6:th cylinder. The fault still remaines on the 3:th cylinder.

I have mesured the voltage on the nozzle cable and gets ~2 volt when the engine i running. I get the same value on the 5:th cylinder.

And the sparkplug gets a littlebit wet but don't smell gasoline.

What should i Do?

By Nozzle's, you mean the Injectors? And the voltage going into all the injectors is the same......?


Try a Compression check?

Yes i mean Injectors

The problem come and goes. Can i really be the compression then??