Outer Limits 4x4 Board

Hey guys heres some pics of my new project

i swaped the 2 door body onto a 4 door chassis
stock rims and tyres for now will have 37 inch wranglers when i swap the patrol diffs in after RWC
2 inch spring lift
spring spacer blocks and 2.5 body lift after rwc
bilstein shocks
il be fabbing a new front and rear bar and sliders
there has been a lot of wiring problems
im slowly working through them
a set of lra flares or rubber ones not sure yet

now for the questions
do the lights in the dash for ign,hand brake ect need to be working for a RWC in vic ?
as the car has stuffed wiring that has been tampered with none of them seem to work
is there wiring diagrams online anywhere
i have searched with no luck
other than that everything is moving along nicely

typed all that and cant work out how to add the pics help ther to please

I'm pretty sure they have to be working for a QLD RWC as they are a safety item. Not sure about Vic though.

The pics- If you look on the main page under miscellaneous, click on the 'Testing' link and it explains there how to link pics. I think they have to be hosted elsewhere.

Hi tinka,

Have a look under:

http://www.landrover.ee/est/varia/downloads/cars.htm

there should be a pdf for 1987 onwards RRC wiring. About 10 meg, so you'll need broadband. Colour codes did not really change over the years, Rover just kept adding relays and fuses for all the 'essentials'.

DL