Outer Limits 4x4 Board

hey guys here is some pics of my first range rover
it started life as a 4 door but i have since preformed a body swap and is now a 2 door
tyres will be 37 inch wranglers
stock 3.5 straight gas will put in a efi mani soon
nissan patrol diffs
now for a few questions
do the ignition light and handbrake lights ect on the dash need to work for rwc in vic ?

Have no idea on ya question but must say it is a very tidy body right there.
Looove the colour aswell Very ahhh seventies

If ya guna run those 37's a body lift will be on the cards also the rear guards will need more attention with the grinder

Tho looks cool good to see that body geting used again

when you do the diff swap look at a set of 80s front springs makes the job heaps easier

what highet will the 80's springs sit the front end at ?
will i need to get lifted 80's ?

did this use to be your old body ?
is there anything i casn do with the rear to make it not vibe so much ?

thanks

Good to see you got the body home

thanks mate
i thought it must have been u i bought it from
just need to get the rubberbody mounts and bolt it down also hook up the brakes will need to swap fittings on end of lines as chassis is later model and has different brake threads

turns out you need all warning lights to be working for roadworthy