Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Feroza SX II Mod Advice

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 53
Joined: Tue Aug 14, 2007 8:59 pm
Location: Hobart, Tasmania

Feroza SX II Mod Advice

Post by 7017 »

Hey everybody,

I bought a stock Feroza SX II Wide-track in April last year,
Seeing I am a college student with a part time job i have finally saved some $ to do some mods. What would anybody recomend?

Your opinion would be great,

7017
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

Post by Tzi »

Best mod you could do to a feroza is to put some off road tyres on it. BFG all terrains are a nice compromise for onroad/offroad.. but mud terrains are better off road
I found with mine that the main problem i used to have was ground clearance at the front. I was always bottoming out on the IFS.
If you can afford it, get it lifted, and if you have more $.. put some bigger tyres on. Both will give you more ground clearance, but be aware of making the front too stiff if you wind it up. ;)
------------------------------------
Tzi -- beware of cheap imitations
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Bigger tyres will help lots off road, the down side is the Feroza's transfer ratio inst low enough, so off road - the gearing will suck. Wouldnt go past 31" on a stock Feroza.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Tzi wrote:Best mod you could do to a feroza is to put some off road tyres on it. BFG all terrains are a nice compromise for onroad/offroad.. but mud terrains are better off road
I found with mine that the main problem i used to have was ground clearance at the front. I was always bottoming out on the IFS.
If you can afford it, get it lifted, and if you have more $.. put some bigger tyres on. Both will give you more ground clearance, but be aware of making the front too stiff if you wind it up. ;)
BFG-AT's? Damn u roza drivers ARE soft :D

Keep watever tires you have on it at the moment. Find a cheap set of wheels, or splash out and get some new one's with a wider offset, and get the most aggressive Mud-terrain type tires you can afford, use them for offroad trips only and they'll probly last you a decade.

Sure its a pain swapping them around before and after a trip, but it saves a lot of tire wear :armsup:
60 + Turbo, 33"s :armsup:
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

Post by Tzi »

soft.. thats a bit harsh. :)
I should point out that my fez currently has 31in MT's sitting on 8in wide F100-offset Sunrasias on it at the moment.. pushing the track 2in+ wider than normal :finger:

I was just suggesting the BFG-AT's because they are a HUGE improvement over road tyres (been there done that)... and you can usually pick up a 2nd hand set with legal tread for about $40each... ;)
------------------------------------
Tzi -- beware of cheap imitations
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

That ok. Since I sold my Extreme trekkers' I've been stuck with AT's on and offroad :oops: . Nankangs though, had BFG's and they where rubbish on tar and off it.

And wanna know another secret? I haven't been properly offroad since march :cry:

But I'm saving for some Interco LTB's so that makes up for it I think :armsup:
60 + Turbo, 33"s :armsup:
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

Post by Tzi »

eew... I threw my nankangs as far as i could... couldnt wait to get them off the car. I had the semi-road kinda tread tho.. maybe AT... and they just couldnt grip off road no matter what I did.
I live in bendigo.. so most of the places i go off road are clay. :)
------------------------------------
Tzi -- beware of cheap imitations
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Get Claws :armsup: :armsup: :lol: ;)

Image


Get the BEST muddies you can afford, 2nd hand if necessary. Lots of them come up in the for sale section.

Wind up your torsion bars enough to clear the new shoes and, depending on what year model you have (The later ones have less leaves in the rear spring pack), you can insert an extra leaf to give a bit of lift at the rear. Extended shackles, which are illegal, but RARELY picked up in any checks will give you a little extra lift and some extra rear travel.

You'll find Suzuki wheels will fit straight onto a Feroza, and stuf for/from them comes up pretty regularly.

As for engine stuff, the best is to ditch the horrible outlet manifold for a set of ectractors and if you can afford it, a 2" exhaust system.
bru21 wrote:What happens in goat, stays in goat!
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Oh, and a bash plate for your transfer case, coz they're scarily exposed down there. Easy to make from a 3mm piece of aluminium, you find the specs on the WARFS website.
bru21 wrote:What happens in goat, stays in goat!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

And as a preventative measure, wrap you engine and gearbox mounts with seatbelt webbing RIGHT NOW.

Otherwise you WILL break mounts and they are expensive.

DO IT ....... or you will be sorry.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 11
Joined: Thu Dec 06, 2007 8:49 pm
Location: ENGLAND

Post by mickeydrippin60 »

yea do the engine mount thing i ripped one off last week end got my new one for £36 about $80 au so yea do that lol
Posts: 338
Joined: Wed May 23, 2007 6:11 pm
Location: Sydney

Post by Buggerific »

What do you mean by wrapping them in seatbelt webbing... Wrapping that around the mount?

Yeah My mate got a fez and he's done a 2" body lift which was fairly inexpensive and soon to be doing a 2" suspension lift as well...

He's running 31's too. I'm running 31" Federal Mud Tyres, they're pretty cheap but they go great guns, i recommend them!
Ozkor Auto Tech - 51 Orchard Road, Brookvale

1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Tzi wrote:eew... I threw my nankangs as far as i could... couldnt wait to get them off the car. I had the semi-road kinda tread tho.. maybe AT... and they just couldnt grip off road no matter what I did.
I live in bendigo.. so most of the places i go off road are clay. :)
Must say I've been pretty happy with them. Wearing well, done probly 10k+ on them and still look new. Only used them offroad on sand, and mud. Obviously they have nothing on a M/T but they were miles ahead of the BFG A/Ts I used to have on road and off.
60 + Turbo, 33"s :armsup:
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

I have wanted to say this for ages....... "Search is your friend" :rofl:

And how does he plan of raising a torsion bar front end ? Winding up the bars doesn't count as you simply loose droop travel, an area Feroza's are sadly lacking at the best of times.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

Post by Tzi »

right... so how do you lift the front without winding the bars??

Thats what I did, and now I lift the left front wheel off the ground a LOT.
I still have droop travel, but not very much (bout 1cm measured at the bump stops)
The back flexes great, but the front is stiffer than ever....:?

btw.. I'm another convert for the engine mount solution. Mine had a busted left engine mount when i got it... $30 at a wreckers for a used mount, some seat belt wrapped around it, and its been fine ever since. Strong as!
------------------------------------
Tzi -- beware of cheap imitations
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests