Outer Limits 4x4 Board

Posted: **Fri Jan 25, 2008 10:46 am**

i have a question folks, who makes a decent 80 series tube front bar??

Posted: **Fri Jan 25, 2008 11:06 am**

Off the top of my head, I think cheezy racing, snake racing or BBM would do it:

www.cheezyracing.com.au
www.snakeracing.com.au
www.bbmotorsports.com.au

but none of these are near you.

Posted: **Fri Jan 25, 2008 9:51 pm**

www.cheezyracing.com.au are tops

I love my rear bar and carrier from them and they certainly do a good job with excellent finish.

Posted: **Sat Jan 26, 2008 9:18 am**

http://2dextremefabrications.com.au/index.html
Got mine done by Dale and i love it; completely custom to what you want.

Posted: **Sun Jan 27, 2008 8:49 am**

I was just reading the latest 4wd Action, and Brooksy's work at "Custom 4x4 Fabrications" got featured at least twice. (07) 4194 1144, Hervey Bay QLD.

Posted: **Sun Jan 27, 2008 9:11 am**

Nobody makes a good looking tube bar for either 80 series or GU's, the body lines etc of neither suit tube bars.

Basicly the same for rear bars on both. 80 series rear bars are just a pain in the arse because of the chassis and towbar setup.

Posted: **Sun Jan 27, 2008 10:44 am**

Guts wrote:Nobody makes a good looking tube bar for either 80 series or GU's, the body lines etc of neither suit tube bars.

Basicly the same for rear bars on both. 80 series rear bars are just a pain in the arse because of the chassis and towbar setup.

I disagree, although I don't think I have seen a production tube bar that looks out of this world

Posted: **Sun Jan 27, 2008 3:22 pm**

carrot wrote:I was just reading the latest 4wd Action, and Brooksy's work at "Custom 4x4 Fabrications" got featured at least twice. (07) 4194 1144, Hervey Bay QLD.

I am actually in Brisbane now - (07) 3297 6557, mob: 0400 443 802.
Thanks carrot for the mention.

brooksy

Posted: **Sun Jan 27, 2008 11:18 pm**

brooksy wrote:
carrot wrote:I was just reading the latest 4wd Action, and Brooksy's work at "Custom 4x4 Fabrications" got featured at least twice. (07) 4194 1144, Hervey Bay QLD.

I am actually in Brisbane now - (07) 3297 6557, mob: 0400 443 802.
Thanks carrot for the mention.

brooksy

No worries! Custom fabricating got quite a few mentions in the latest (errr... March 2008... why do I have March 2008?!?) 4wd Action mag... but Brooksy, the contact details they provided for you are already out of date!

Posted: **Tue Jan 29, 2008 9:06 am**

we are currently bringing these in for mine, and some spares.

and these

Posted: **Tue Jan 29, 2008 8:10 pm**

what are ya worried bout a bar for your car you should be movin furniture cause your house is going under water. all you need to do is decide what type you want and wait for my suspension and your car is next on the list, its even before my mums rebuild and turbo set-up

Posted: **Tue Jan 29, 2008 10:17 pm**

yeah right you've gotta finish harry's yet!!

i don't know what i'm doin for a front bar yet thats why i asked the question for ideas.

i like the pics of the bar on that cut down 80 but i'm goin highmount coz i found out that you can't run 24v in trophy class so scrapped that prototype lowmount idea. and i'm gonna run trophy class till i turbo the big girl.

i moved everything under my house the other day, i was hoping to get flooded in by today so i didn't have to get back to work but sadly am back out for another tour

Posted: **Wed Jan 30, 2008 5:24 pm**

ats4x4dotcom wrote:we are currently bringing these in for mine, and some spares.

and these

what are the slee bars worth?

Posted: **Wed Jan 30, 2008 6:42 pm**

Whats a rear bar worth ???
Will they fir a 2inch body lift ??
Cheers dan

Posted: **Wed Jan 30, 2008 7:55 pm**

MUD000 wrote:Whats a rear bar worth ???
Will they fir a 2inch body lift ??
Cheers dan

Wont suit body lift.

Pricing coming this week, I just ordered them, with a guesstamate, will know when they ship, based on exchange rate / shipping.

Posted: **Wed Jan 30, 2008 8:15 pm**

Stu at F.A.T. will do 'em.

Posted: **Wed Jan 30, 2008 8:17 pm**

carrot wrote:
brooksy wrote:
carrot wrote:I was just reading the latest 4wd Action, and Brooksy's work at "Custom 4x4 Fabrications" got featured at least twice. (07) 4194 1144, Hervey Bay QLD.

I am actually in Brisbane now - (07) 3297 6557, mob: 0400 443 802.
Thanks carrot for the mention.

brooksy
No worries! Custom fabricating got quite a few mentions in the latest (errr... March 2008... why do I have March 2008?!?) 4wd Action mag... but Brooksy, the contact details they provided for you are already out of date!

Yeah tell me about the contact details (wonder who the journo is

.) Hopefully Brendan reads this cos I asked him to change it months ago

Posted: **Wed Jan 30, 2008 8:36 pm**

BUSTED100 wrote:
ats4x4dotcom wrote:we are currently bringing these in for mine, and some spares.

what are the slee bars worth?

again, cost of the Slee bars or ball park figure?

Posted: **Mon Feb 04, 2008 8:56 am**

BUSTED100 wrote:
BUSTED100 wrote:
ats4x4dotcom wrote:we are currently bringing these in for mine, and some spares.

what are the slee bars worth?
again, cost of the Slee bars or ball park figure?

They havent shipped as yet, but dont worry, I havent forgotten.

Posted: **Mon Feb 04, 2008 2:55 pm**

ats4x4dotcom wrote:
BUSTED100 wrote:
BUSTED100 wrote:
ats4x4dotcom wrote:we are currently bringing these in for mine, and some spares.

what are the slee bars worth?
again, cost of the Slee bars or ball park figure?
They havent shipped as yet, but dont worry, I havent forgotten.

When's the website getting an update??

Posted: **Tue Feb 05, 2008 10:34 am**

std80 wrote:
ats4x4dotcom wrote:
BUSTED100 wrote:
BUSTED100 wrote:
ats4x4dotcom wrote:we are currently bringing these in for mine, and some spares.

what are the slee bars worth?
again, cost of the Slee bars or ball park figure?
They havent shipped as yet, but dont worry, I havent forgotten.
When's the website getting an update??

Thats the bosses dept, and despite all of my, and customers hassling, he has yet to commit budget to it, its out of my hands, but feel free to email info@ats4x4.com and ask

Posted: **Tue Feb 05, 2008 1:18 pm**

ats4x4dotcom wrote:
std80 wrote:
ats4x4dotcom wrote:
BUSTED100 wrote:
BUSTED100 wrote: what are the slee bars worth?
again, cost of the Slee bars or ball park figure?
They havent shipped as yet, but dont worry, I havent forgotten.
When's the website getting an update??
Thats the bosses dept, and despite all of my, and customers hassling, he has yet to commit budget to it, its out of my hands, but feel free to email info@ats4x4.com and ask

I emailed info@ats4x4.com last week. No reply as yet...

Posted: **Tue Feb 05, 2008 2:22 pm**

pridhac wrote:
ats4x4dotcom wrote:
std80 wrote:
ats4x4dotcom wrote:
BUSTED100 wrote: again, cost of the Slee bars or ball park figure?
They havent shipped as yet, but dont worry, I havent forgotten.
When's the website getting an update??
Thats the bosses dept, and despite all of my, and customers hassling, he has yet to commit budget to it, its out of my hands, but feel free to email info@ats4x4.com and ask
I emailed info@ats4x4.com last week. No reply as yet...

Well thats interesting, as they come to me as well, or should, and I reply to everyone normally.

please resend it to darren@ats4x4.com

Posted: **Wed Feb 06, 2008 1:15 pm**

ats4x4dotcom wrote:
Well thats interesting, as they come to me as well, or should, and I reply to everyone normally.

please resend it to darren@ats4x4.com

'Normally' being the key word. I'm still waiting to hear back from you. You are slipping Daz

Posted: **Wed Feb 06, 2008 2:40 pm**

Toddles wrote:
ats4x4dotcom wrote:
Well thats interesting, as they come to me as well, or should, and I reply to everyone normally.

please resend it to darren@ats4x4.com
'Normally' being the key word. I'm still waiting to hear back from you. You are slipping Daz

Im still waiting for the printer to finish printing off your novel

Pricing, for those who wanted it.

80 Slee Bull bar $ 1495 in black.

Rear bar for 80 or 100 with wheel carrier, and high lift jack mount, in black powdercoat $ 2995

Alloy anodised fairlead to suit bull bar $99

Masterpull 3/8 rope with hook to suit $ 389

Slee Off-Road Jac-Kof tool $149 see this link for uses
http://www.sleeoffroad.com/products/pro ... detail.htm

And Billet front arms with 10 deg castor and steering arm clearance, black powdercoated, SLEE OFFROAD engraved each side.

First order ships next week or so, so will be here in about 4 weeks, along with more diff drops etc..

Posted: **Fri Feb 08, 2008 10:28 am**

Just had to correct the rear carrier price.

Its now correct.

Posted: **Mon May 19, 2008 3:51 pm**

seemed to be a lot of talk but no pics? Only pics I've found is on the Cheezy racing site. 2DExtreme have a good price and really fast service but would like some more examples to see what tube bars look like on the 80 series.

Posted: **Mon May 19, 2008 5:52 pm**

ats4x4dotcom wrote:Just had to correct the rear carrier price.

Its now correct.

How much for one of these? Part #: SOF1034 http://www.sleeoffroad.com/products/fj62rearbumper.htm

Posted: **Tue May 20, 2008 11:25 am**

Surfection made me a sexy tube bar, if you want to check a piccy out, it is the white cruiser with the bonnet open half way down the page

http://www.lcool.org/trips/Bendethra05/ ... report.htm

Outer Limits 4x4 Board

Who makes a decent 80 series tube bar

Who makes a decent 80 series tube bar