Outer Limits 4x4 Board

hey guys thinking about sas'ing my pathy useing GQ f&r diffs

is is posible to bolt a gq transfer to pathy box? or to make the output on the drivers side at the front??

also will be looking to use GQ arms,coil and shocky mounts etc in the front and useing the standard pathy mounts of the pathy housing on to a gq housing in the rear..

haveing a few issues finding out much info on it atm.

can any one help me a bit?

what motor you got mate?

2.4 pet

Use a MQ front diff and get it rotated. The GQ is too wide. Use the GQ radius arms and spring/shock towers and bases. Front springs in mine are from a bundy. Your panhard will have to be fabbed.
I hope to get rid of my diff (putting a stock one in (not rotated with a divorced transfer case)) later this year.

a couple of pics for you.

that looks sweet as..
how did you go with engenering?