Page 1 of 1
diff welding
Posted: Fri Feb 01, 2008 2:22 pm
by zook kid
hey i was just wondering if you welded the front diff would it drive normally with the hubs unlocked?
Re: diff welding
Posted: Fri Feb 01, 2008 2:32 pm
by lay80n
zook kid wrote:hey i was just wondering if you welded the front diff would it drive normally with the hubs unlocked?
Yes it will.
Layto....
Posted: Fri Feb 01, 2008 4:17 pm
by 11_evl
and it will drive like shit with them locked in
Posted: Fri Feb 01, 2008 5:17 pm
by zook kid
thanks for the replies
Posted: Fri Feb 01, 2008 5:31 pm
by DAV029
Posted: Fri Feb 01, 2008 6:14 pm
by Gwagensteve
11_evl wrote:and it will drive like shit with them locked in
Brilliant.
welded front diffs are hack. they suck 99% of the time. Weld the rear and pit a lock right or something on the front.
Steve.
Posted: Fri Feb 01, 2008 6:55 pm
by joshnz1
welded fronts arnt that bad,u just gotta man up a bit
Posted: Fri Feb 01, 2008 7:22 pm
by 11_evl
joshnz1 wrote:welded fronts arnt that bad,u just gotta man up a bit
yes your rite, they are JUST bearable, but a lockrite is soo much better.
and air is just too fancy nancy
Posted: Fri Feb 01, 2008 9:00 pm
by St Jimmy
Why wreck a good diff when you can get a lockright for under 300 bucks and it will be so much better.
Posted: Sat Feb 02, 2008 9:49 am
by germo
joshnz1 wrote:welded fronts arnt that bad,u just gotta man up a bit
I agree
and cost zip
Posted: Sat Feb 02, 2008 10:43 am
by want33s
boner59 wrote:Why wreck a good diff when you can get a lockright for under 300 bucks and it will be so much better.
X 2....Or fit a mini spool* for $120 and you can always return it to stock or fit a locker later.
(*) mini spools are only available for rear diffs.
Posted: Sun Feb 03, 2008 9:42 am
by DAV029
boner59 wrote:Why wreck a good diff when you can get a lockright for under 300 bucks and it will be so much better.
who is that through
Posted: Sun Feb 03, 2008 10:08 am
by 11_evl
lowrangeoffroad
Posted: Sun Feb 03, 2008 4:23 pm
by keechox@autospeed.com
who does mini spools????
Posted: Sun Feb 03, 2008 4:25 pm
by cj
keechox@autospeed.com wrote:who does mini spools????
Trail Tough but you can also buy them through Sean at LowRange Offroad.