Outer Limits 4x4 Board

Just pulled down the donor front axle etc and got the diagram Jac Mac sent me for boring the stub axles and inserting the mt12003 toyota bushes. However my stubs are different to those in the diagram as there is a perforated looking bush inserted into the inside of the cv end of the stub already, and this is larger ID than the OD of the tojo bush.
Has anyone encountered this? I guess I'll just have to machine up either a specer sleeve or a new bush from bronze?

Cheers
Giles

Yep the stubs u have are fron a late 80's rangie ive seen this type of stub before its got a different cv to the early rangie what year truck did the donor front axle come from and what sorta stubs do jacmac recomend ????

The vehice is a 1987 and the donor axle if from another 1987.
I told Jac mac this and he made no mention of suitability or not.
I have an earlier set of front hubs and stubs on another front end, will these fit the later swivel balls? If so I will just use the earlier stubs and hubs.
Cheers
Giles

Yepthe earlyer stubs will bolt up