350 chev into GQ swb
Posted: Sun Feb 03, 2008 6:06 pm
I know there are a few threads around, but just wanna get it all here and clarify stuff and get info etc, all in the one post so i dont have to look around for ages.
I am wanting to put a 350 chev (4 bolt) in my swb GQ, and some mods like a mild cam for better low down to mid range power, and also the mild cam gives a bit of a rough idle which i would like (sounds good). Also a dual plane 'Performer' intake, and a 4 barrel 650cfm vac secondary carby. It will be on straight gas to start with, as i have 2 gas tanks, and no petrol tank, but will be set up for dual fuel soon after as i want petrol there, for long trips, backup, and i hear tassie has limited fuel stations that sell gas.
was also looking at Marks adaptors for all that stuff, is there any other places that do the conversion kits etc?? cheaper??
Any info about what kind of things to use in the 350, like cams intakes etc. any info on this conversion would be a great help thankyou.
I am wanting to put a 350 chev (4 bolt) in my swb GQ, and some mods like a mild cam for better low down to mid range power, and also the mild cam gives a bit of a rough idle which i would like (sounds good). Also a dual plane 'Performer' intake, and a 4 barrel 650cfm vac secondary carby. It will be on straight gas to start with, as i have 2 gas tanks, and no petrol tank, but will be set up for dual fuel soon after as i want petrol there, for long trips, backup, and i hear tassie has limited fuel stations that sell gas.
was also looking at Marks adaptors for all that stuff, is there any other places that do the conversion kits etc?? cheaper??
Any info about what kind of things to use in the 350, like cams intakes etc. any info on this conversion would be a great help thankyou.