Outer Limits 4x4 Board

Well spat another rear uni last week (diff end) with the rumble of the Simex's I couldn't tell until it was squawking it's head off.
I took it to a bloke I know as I just didn't have time to do it myself.
I asked him to do a bit of shopping around and he found a Hardy Spicer unit (part no RUJ 3006) for $80 (factory around $100) which is a direct relacement. These are better than the factory uni in that they have a pressed in rubber seal in the bearing caps, much more mud/crap proof than the Mitsu ones. Also has a grease nipple. Due to the angle mine runs on and the mud I drive it is basically a consumable item now.
The last one (factory) lasted 2 years (regularly greased) so we will see how long this one lasts.

Damn, that sucks..

one of my pet hates/phobia's when i was in the trade was replacing uni's....

not looking forwrd to doing any on the triton..... but this may not (hopefully) be far a way after looking at the angle the rear ones is running at with ext shackles...

Rob

$80 thats damn pricey for 1 uni..we get ours at about $15 to $250 for cars to trucks dependin on size.we get most or our unis from driveline in queensland. maybe u should try them out?