Page 1 of 1
Hi Pinion in Hilux
Posted: Sat Feb 09, 2008 9:54 pm
by jlux3012
Hey guys, I have aquired a 80 series Hi pinion front diff centre and want to put it into my 92 solid axle hilux, are they a straight swap over and will I be able to use my lockrite locker.
Also are the 80 series rears a Hi Pinion as well and can the same be done??
Re: Hi Pinion in Hilux
Posted: Sat Feb 09, 2008 10:01 pm
by toyrex
jlux3012 wrote:Hey guys, I have aquired a 80 series Hi pinion front diff centre and want to put it into my 92 solid axle hilux, are they a straight swap over and will I be able to use my lockrite locker.
Also are the 80 series rears a Hi Pinion as well and can the same be done??
The hi pinion is a straight bolt into your 92 solid axle , 80 series is a 4.1 ratio
Your 92 Hilux ratio should have 4.3 diesel or 4.875 petrol unless you have already done a ratio change
Posted: Sat Feb 09, 2008 11:09 pm
by Trusa
Toyrex is right, the ratios will differ although it will bolt straight in. The 80 series rear is a larger centre and will not fit the hilux.
Posted: Sun Feb 10, 2008 1:41 pm
by jlux3012
Could I be lucky enough that the ring and pinion gear set from my hilux centre fit the 80 series centre, can anyone tell me this.
hi pinion
Posted: Sun Feb 10, 2008 2:04 pm
by Stulux
no the gears can't be swaped from low to high pinion as the high pinion has reverse cut gears. I think Bunderra has 4.3 high pinion gears
Posted: Sun Feb 10, 2008 8:44 pm
by Willy Hilux
79 series aswell