Page 1 of 1

Disco Interior Swap

Posted: Sun Feb 10, 2008 9:51 am
by BigStu
I have just picked up a 93 Disco, and was looking to replace the dash with one from a 94.

Unfortunately the mount points are different, as is the heater and air conditioner.

Just wondering if anyone has managed to do the swap, and if they have, what did they do to make it fit.

93 Disco (dash removed)
http://s211.photobucket.com/albums/bb25 ... ure078.jpg

http://s211.photobucket.com/albums/bb25 ... ure079.jpg

94 Disco (dash removed)
http://s211.photobucket.com/albums/bb25 ... ure081.jpg

93 Dash
http://s211.photobucket.com/albums/bb25 ... ure084.jpg

94 Dash
http://s211.photobucket.com/albums/bb25 ... ure085.jpg

Re: Disco Interior Swap

Posted: Sun Feb 10, 2008 12:23 pm
by Loanrangie
BigStu wrote:I have just picked up a 93 Disco, and was looking to replace the dash with one from a 94.

Unfortunately the mount points are different, as is the heater and air conditioner.

Just wondering if anyone has managed to do the swap, and if they have, what did they do to make it fit.

93 Disco (dash removed)
http://s211.photobucket.com/albums/bb25 ... ure078.jpg

http://s211.photobucket.com/albums/bb25 ... ure079.jpg

94 Disco (dash removed)
http://s211.photobucket.com/albums/bb25 ... ure081.jpg

93 Dash
http://s211.photobucket.com/albums/bb25 ... ure084.jpg

94 Dash
http://s211.photobucket.com/albums/bb25 ... ure085.jpg
Mickrangie just transformed his 93 rangie into a disco using a 96 dash etc so the conversion would be similar, you will need to drill out all the spot welds on thje later dash metal work and weld back into the 93, lots of wiring to sort out - not for the faint hearted !

Re: Disco Interior Swap

Posted: Sun Feb 10, 2008 7:19 pm
by shakes
Loanrangie wrote: Mickrangie just transformed his 93 rangie into a disco using a 96 dash etc so the conversion would be similar, you will need to drill out all the spot welds on thje later dash metal work and weld back into the 93, lots of wiring to sort out - not for the faint hearted !
I only had a minimal hand in this when the previous owner done mine, not for the faint hearted is one way to put it ;)

I've also got a feeling all the switches and loom plug's are different across those two dash's which will make it all the more fun (correct me if I'm wrong)